Bedienungsanleitung Neff B45C42N3 (Seite 14 von 40) (Englisch)

495331

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Once the cooking time has elapsed, the appliance switches off

automatically.

Turn the operating mode selector to the

Û position and push it

in.

End of operation

Automatic switch-off at a set time.

1.Set the operating mode and temperature.

2.Press the KJ clock function button repeatedly until the KJ

and

y symbols light up.

3.Set the end of operation using the rotary selector

(e.g.

‚ƒ:„‹ o'clock).

The setting is applied automatically. The time of day is then

displayed again.

4.Press the ƒ Start button.

The appliance heats up.

Once the cooking time has elapsed, the appliance switches off

automatically.

Turn the operating mode selector to the

Û position and push it

in.

Preset operation

The appliance switches on automatically, then switches off

automatically at the time preselected for the end of operation.

To set this function, combine the cooking time and end of

operation clock functions.

Bear in mind that food which spoils easily should not be left in

the cooking compartment for too long.

1.Set the operating mode and temperature.

2.Press the KJ clock function button repeatedly until the KJ

and

x symbols light up.

3.Set the cooking time with the rotary selector

(e.g.

‚:„‹ hours).

The setting is applied automatically.

4.Press the KJ clock function button repeatedly until the KJ

and

y symbols light up.

5.Set the end of operation using the rotary selector

(e.g.

‚ƒ:„‹ o'clock).

6.Press the ƒ Start button.

The appliance switches off and waits until the appropriate

time to switch on (

‚‚:‹‹ in the example). The appliance

switches off automatically at the time set for the end of

operation (

‚ƒ:„‹ ). A signal sounds and the y symbol

flashes.

7.Turn the operating mode selector to the Û position and push

it in.

Setting the clock

You can only change the clock when no other clock function is

active.

1.Press the KJ clock function button repeatedly until

the

KJand 3 symbols light up.

2.Set the clock using the rotary selector.

The setting is applied automatically.

Rapid heat up

Depending on the appliance features, you can reduce the

preheat time for the

3 Hot air and ë Bread-baking operating

modes if the set temperature is higher than 100 °C.

Note: During Rapid heat up, do not place any food in the

cooking compartment until the

f symbol goes out.

1.Set the operating mode and temperature.

2.Press the KJ clock function button repeatedly until the KJ

and

f symbols light up and Œ is displayed in the clock

display.

3.Turn the rotary selector clockwise.

Ž is displayed in the clock display and the f symbol lights

up. Rapid heat up is activated.

4.Press the ƒ Start button.

The appliance heats up.

After reaching the set temperature, Rapid heat up switches off.

The

f symbol goes out.

Checking, correcting or deleting settings

1.To check your settings, press the KJ clock function button

repeatedly until the corresponding symbol lights up.

2.If necessary, you can correct your setting using the rotary

selector.

3.If you wish to cancel your setting, turn the rotary selector anti-

clockwise to the original value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B45C42N3 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B45C42N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info