Bedienungsanleitung Neff B45C42N3 (Seite 31 von 40) (Englisch)

495331

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Start the descaling programme.

The descaling programme can only be started once the

cooking compartment has completely cooled down. There must

be no residual heat (

œ or •) shown in the display.

If you have cooked using steam immediately before descaling,

you must first switch the appliance off so that the residual water

is pumped out of the evaporator system.

1. Dissolve the descaling tablets in water to make a descaling

solution.

Note: Follow the manufacturer's instructions for the descaling

tablets.

2. Switch on the appliance.

3. Press and hold the Í descaling button for 3 seconds.

š†™ appears in the temperature display and the Í and

Î symbols light up.

4. Fill the water tank with 400 ml of descaling solution and slide

it in fully. Dispose of the rest of the descaling solution and

rinse with water.

5. Press the ƒ Start button.

The

ƒ symbol lights up Descaling starts.

Notes

■ If the water tank has not been filled, a signal sounds and the

Descale programme does not start. Fill the water tank with

the descaling solution and slide it in fully.

■ If a signal sounds and the ƒ symbol flashes, this indicates

that the

ƒ Start button has not been pressed. Press the

ƒ Start button.

■ The clock display shows how long the Descale programme

has left to run.

1st rinse

A signal sounds and the

Î symbol lights up.

1. Empty the water tank, rinse it out thoroughly and fill it with

400 ml fresh water.

2. Slide in the water tank all the way.

§ü‚ appears in the temperature display (rinsing 1 =

1st rinse). The

ƒ start symbol flashes.

3. Press the ƒ Start button.

The

ƒ symbol lights up The appliance starts rinsing.

After the first rinse has completed, a signal sounds and the

Î symbol lights up.

2nd rinse

1. Empty the water tank, rinse it out thoroughly and fill it with

400 ml fresh water.

2. Slide in the water tank all the way.

§ü ƒ appears in the temperature display (rinsing 2 =

2nd rinse). The

ƒ symbol flashes.

3. Press the ƒ Start button.

The

ƒ symbol lights up The appliance starts rinsing.

After the second rinse is complete, the

Í symbol goes out and

the

Î symbol flashes.

Removing the remaining water

1. Empty and thoroughly rinse out the water tank.

The

Î symbol goes out.

2. Switch off the appliance.

Self-cleaning surface

The back wall of the cooking compartment is coated with self-

cleaning enamel. This coating absorbs and disintegrates

splashes from baking and roasting while the oven is in

operation.

Large splashes only disappear after the oven has been used

several times.

Discolouration on the rear wall does not affect the self-cleaning

function.

Caution!

Damage to surfaces on self-cleaning areas due to applying

oven cleaner.Never clean the self-cleaning surfaces with oven

cleaner.

If oven cleaner accidentally gets onto self-cleaning surfaces,

remove it immediately with a sponge and plenty of water.

Caution!

Damage to surfaces on self-cleaning areas due to the use of

abrasive and acidic cleaning agents and aids.

Do not use cleaning agents containing abrasive substances or

acids.

Do not use abrasive cleaning aids such as steel wool or

scourers.

EasyClean®

Your appliance comes with an > EasyClean® function to

make cleaning the cooking compartment easier. An

automatically controlled vaporisation of soapy water loosens

residues and makes it easier to remove them afterwards.

In the case of persistent dirt, you can

■ allow the soapy water to penetrate for a while before

switching on EasyClean

■ rub detergent onto the dirty surfaces before switching on the

cleaning aid

■ repeat the EasyClean® function once the cooking

compartment has cooled

Preparation and switching on

EasyClean® only starts when the cooking compartment is cool.

: Risk of scalding and surface damage!

Never pour water into the cooking compartment when it is hot.

Water vapour will be created and the enamel may be damaged

because of the change in temperature.

1. Remove the accessories from the cooking compartment.

2. Carefully pour 0.4 litres of water (not distilled water) with

some detergent into the base trough of the cooking

compartment (Fig. A).

3. Close the appliance door.

4. Switch on > EasyClean®.

“’† appears in the temperature display.

If, after EasyClean is switched on,

• or œ and “’† appear

alternately in the temperature display, the cooking

compartment is not completely cooled.

Wait until the cooking compartment has cooled down and

switch EasyClean® on again.

Once EasyClean® has finished the cooking compartment

light switches on. A signal sounds.

5. Press the KJ clock function button to exit the clock function.

Cleaning up and switching off

Do not leave the remaining water in the cooking compartment

for a long time (e.g. overnight).

1. Open the appliance door and remove the remaining water

with an absorbent sponge cloth (Fig. B).

$ %

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B45C42N3 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B45C42N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info