Bedienungsanleitung Neff B45C42N3 (Seite 35 von 40) (Englisch)

495331

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Replacing the oven light bulb

Replace faulty oven light bulbs.

You can obtain replacement light bulbs from customer service

or specialist retailers: E14, 220 - 240 V, 40 W, heat resistant to

300 °C. Only use these oven light bulbs.

: Risk of electric shock !

Disconnect the appliance from the power supply. Switch off the

circuit breaker or remove the fuse from the household fuse box.

1. Place a tea towel in the cold cooking compartment to prevent

damage.

2. Turn the glass cover anticlockwise and remove it.

3. Replace the oven light bulb with a bulb of the same type.

4. Screw on the glass cover again.

5. Remove the tea towel and switch on the circuit breaker.

Note: If the glass cover cannot be unscrewed: use rubber

gloves to turn it. You can order a special removal tool through

the after-sales service (order no. 613634)

The temperature display shows, "EXXX",

e.g. E300

Internal fault in the appliance electronics

Press the

KJ clock function button. If the

message does not go out, pull out the

mains plug and plug it back in again after

approx. 10 seconds

Appliance operation is not possible,

and -

†- appear in the temperature display

The appliance has been manually blocked Deactivate the lock

(see section: Childproof lock)

Appliance operation is not possible,

and -

†˜ appear in the temperature display

The appliance controls are automatically

blocked

Deactivate the permanent lock

(see section: Childproof lock)

The appliance does not heat up, the two

dots flash on the clock display and

‚‡‹©,

for example, appears in the temperature

display

A button combination was actuated

Turn the operating mode selector to the

off position, press and hold the

± info but-

ton for 3 seconds, then press and hold

the

KJ clock function button for

4 seconds, then press and hold the

± info

button again for 3 seconds

Electronically controlled functions are mal-

functioning

Energy surges (e.g. lightning strike) Reset the function concerned

When an operating mode is switched on,

•

œ appears in the temperature display

The appliance has not cooled down fully Wait until the appliance has cooled down,

then switch on the operating mode again

The appliance has switched off automati-

cally,

‹‹‹ flashes in the temperature dis-

play

The appliance has switched off to protect

itself from overheating

Turn the operating mode selector back to

the Û position

Smoke is generated during roasting or grill-

ing

Fat is burning on the grill element Continue grilling or roasting until the fat on

the grill element has burnt away

Wire rack or universal pan inserted incor-

rectly

Check the shelf heights (see section:

Roasting or grilling)

High levels of condensation are generated

in the cooking compartment

Normal occurrence (e.g. when baking

cakes with very moist toppings or roasting

a large joint)

Open the appliance door briefly from time

to time during operation

Enamelled accessories have matt, light-col-

oured marks

Normal occurrence caused by dripping

meat or fruit juices

Not possible

Door panels are misted up Normal occurrence caused by tempera-

ture differences

Heat the appliance up to 100 °C and then

switch off again after 5 minutes

The appliance requires frequent descaling The water hardness has been set too high Check the water hardness in the Basic

settings menu and adjust if necessary.

Cooked dishes turn out too moist or too

dry when cooking with steam-assisted

applications

The wrong altitude range has been set Check the altitude range in the Basic set-

tings menu and adjust if necessary

The wrong steam intensity was selected Select a higher or lower steam intensity

"E870" appears in the temperature display The pump has pumped air several times

in succession

Press the

KJ clock function button.

Fill the water tank and slide it fully in

"E8XX" appears in the temperature display The steam-assisted function is malfunc-

tioning

Press the

KJ clock function button.

Note: Applications without steam assist-

ance are ready for operation

Problem Possible cause Remedial action

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B45C42N3 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B45C42N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info