Bedienungsanleitung Neff B45CS24 N0 (Seite 25 von 48) (Englisch)

621404

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Trouble shooting en

2. Push the intermediate panel downwards in the ‚

area, insert the ƒ holder at an angle and push down

until it locks into place (Fig. ").

The holder is inserted (Fig. #).

3. Insert the inner glass into the holder „ on the left and

right (Fig. $).

4. Push the inner glass downwards until it locks into

place (Fig. %).

3Trouble shooting

Trouble shooting

If a fault occurs, there is often a simple explanation.

Before calling the after-sales service, please refer to the

fault table and attempt to correct the fault yourself.

Tip: If a meal does not turn out exactly as you wanted,

refer to the "Tested for you in our cooking studio"

section.Here, you will find plenty of cooking tips and

notes.

:Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Fault table

:Warning – Risk of electric shock!

■ Work on the appliance electronics may only be

performed by a specialist.

■ Always disconnect the appliance from the power

supply when work is carried out on the electronics.

Switch off the circuit breaker or remove the fuse

from your household fuse box.

--------







Fault Possible cause Notes/remedy

The appliance does not work The plug is not plugged into the mains Connect the appliance to the power supply

Power cut Check whether other kitchen appliances are working

The circuit breaker is faulty Check in the fuse box to make sure that the fuse for

the appliance is OK

After switching on an operating mode,

a message is shown on the display

which indicates that the temperature

is too high

The appliance has not cooled down sufficiently Allow the appliance to cool down and switch the oper-

ating mode on again

The appliance cannot be switched on;

the 1 symbol is shown on the dis-

play

The automatic childproof lock is activated Press and hold the 0 touch button until the 1 sym-

bol goes out

The appliance cannot be operated

when it is switched on; the 1 symbol

is shown on the display

The childproof lock is activated Press and hold the 0 touch button until the 1 sym-

bol goes out

The appliance does not heat up; 6 is

shown on the display

Demo mode is activated in the basic settings Disconnect the appliance from the mains for approx.

10 seconds (switch off the circuit breaker in the fuse

box) and then deactivate demo mode in the basic set-

tings within 3 minutes

~ "Basic settings" on page 16

"EXXXX" appears on the display, e.g.

"E0111"

Technical problem Switch the appliance off and back on again

If the message appears again, call the after-sales ser-

vice

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B45CS24 N0 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B45CS24 N0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info