Bedienungsanleitung Neff B46W74N3 (Seite 11 von 36) (Englisch)

495351

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Rapid heat up

You can reduce the preheat time for the CircoTherm® or

Bread-baking operating modes if the set temperature is higher

than 100° C.

Note: During rapid heat up, do not place any food in the

cooking compartment while the

R button is illuminated.

1. Set the operating mode and temperature, and start.

2. Touch the R button.

The

R button lights up and “Rapid heat up” appears in the

text display.

After reaching the set temperature, rapid heat up switches off.

The

R button and “Rapid heat up“ go out in the text display

and a signal sounds.

Cancelling rapid heat up

Touch the

R button. The R button and “Rapid heat up“ go out

in the text display.

Personal programmes

The appliance offers you the option to record, save and play

back personal programmes. In your personal programme, you

can record the cooking process for elaborate food or your

favourite dishes in programme steps, e.g. for lasagne:

Step 1: 50 minutes with CircoTherm® at 160 °C

Step 2: 5 minutes on full-surface grill at 275 °C

A maximum of 25 personal programmes can be saved.

Recording

Only begin the recording when the cooking compartment is

cold. The recording must be at least one minute long in order

for it to be saved.

1. Press and hold the ~ button for 1 second.

2. Touch the Y button.

3. Push the NeffNavigator down in order to go to the

“Personal programmes” menu.

4. Push the NeffNavigator down in order to select

“New programme”.

5. Scroll the NeffNavigator in order to select the operating mode

for “New programme step 1” (e.g. CircoTherm), and push

down.

6. Scroll the NeffNavigator if necessary in order to change the

default temperature for “Step 1” (e.g. 160 °C).

7. Touch the m button in order to apply the settings you have

entered for Step 1.

The oven begins to heat up.

8. If the oven does not need to be preheated for your dish,

touch the

m button again while the oven is still cold.

If the oven should be preheated for your dish, do not touch

the

m button until the oven has heated up.

9. Once the desired cooking time has elapsed (e.g.

50 minutes), push the NeffNavigator down, select “Add step”

and push down again.

Touch the

m button in order to end the recording of Step 1

(see: Ending and saving).

Add step 2

1. Scroll the NeffNavigator if necessary in order to change the

operating mode for “Step 2” (e.g. Full-surface grill), and push

down.

Push the NeffNavigator down in order to retain the operating

mode.

2. Scroll the NeffNavigator if necessary in order to change the

temperature for “Step 2”, and push down.

3. Touch the m button in order to apply the inputs for step 2

and start the operating mode.

4. Once the desired cooking time has elapsed, touch the

m button in order to end the recording of Step 2 (see:

Ending and saving).

Up to three steps can be recorded. For each step you can

change both the operating mode and the temperature.

Ending and saving

1. Push the NeffNavigator down in order to save the

“Record New Programme”.

2. Push the NeffNavigator from the front in order to assign a

name (e.g. Lasagne) to the recorded programme.

3. Push the NeffNavigator down and select “Correct/Save”

4. Scroll the NeffNavigator and select “Save”.

5. Push in the NeffNavigator in order to save the programme

under the name entered.

Ending and discarding

1. Touch the m button.

2. Scroll the NeffNavigator and select “Discard”.

3. Push the NeffNavigator from the front.

Starting the programme

1. Press and hold the ~ button for 1 second.

2. Touch the Y button.

3. Push the NeffNavigator down in order to go to the

“Personal programmes” menu.

4. Scroll the NeffNavigator in order to select the saved

programme.

5. Touch the m button.

“Please wait” appears on the display.

6. When “Insert food” appears in the text display, insert your

food and press the

m button.

The programme runs. If there are several programme steps,

an audible signal sounds after each step.

7. Once the programme has elapsed, an audible signal sounds

and the

xsymbol flashes. Press the 7 button.

&

3UHVVVWDUWWRUHFRUG

&LUFR7KHUP

Assigning a name NeffNavigator

Select characters Scroll

Apply characters Press in

Correct characters Push the NeffNavigator down and select

“Correct”

Press the NeffNavigator from the front to

cancel a character

$GGVWHS

&LUFR7KHUP

&

HDGEDNLQJ

7RSERWWR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B46W74N3 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B46W74N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info