Bedienungsanleitung Neff B6ACH7HH0B (Seite 26 von 40) (Englisch)

778168

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

en Trouble shooting

5. Push down on the intermediate panel around ƒ, slide

the holder „ in at an angle and push down until it

clicks into place (Fig. &).

The holder has been inserted (Fig. ').

6. Insert the inner glass into the mounting rail … at an

angle towards the back (Fig. ().

7. Push the inner glass downwards until it clicks into

place (Fig. )).

3Trouble shooting

Tr oubl e shoot i ng

If a fault occurs, there is often a simple explanation.

Before calling the after-sales service, please refer to the

fault table and attempt to correct the fault yourself.

Rectifying faults yourself

You can often easily rectify technical faults with the

appliance yourself.

If a dish does not turn out exactly as you wanted, you

can find useful cooking tips and instructions at the end

of this instruction manual. ~ "Tested for you in our

cooking studio" on page 28

--------

:Warning – Risk of injury!

Incorrect repairs are dangerous. Do not attempt to

repair the appliance yourself. Repairs must only be

carried out by one of our trained after-sales engineers. If

the appliance is defective, call the after-sales service.

:Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Error messages on the display

If an error message with "“" appears on the display,

e.g. “‹†-„ƒ, touch the v button. This will reset the

error message. Reset the time, if necessary.

If the fault was a one-off, you can continue to use your

appliance as normal. If the error message appears

again, call our after-sales service and quote the exact

error message and the E no. of your appliance.

~ "Customer service" on page 27

Maximum operating time

If you do not change the settings on your appliance for

several hours, the appliance will stop heating

automatically. This prevents unintentional continuous

operation.

Fault Possible

cause

Notes/remedy

The appliance is

not working.

Defective cir-

cuit breaker.

Check the circuit breaker in the

fuse box.

Power failure Check whether the kitchen light

or other kitchen appliances are

working.

The time is flash-

ing on the display.

Power failure. Reset the time.

After switching on

an operating

mode, œ flashes

in the display.

The appliance

has not

cooled down

sufficiently.

Switch off the appliance, allow it

to cool down and switch the oper-

ating mode on again.









No settings can

be made on the

appliance. The

symbol 1 lights

up in the display.

The child-

proof lock is

activated.

Press and hold the v button until

the 1 symbol goes out in the dis-

play. Settings can be made on the

appliance.

The childproof lock can be deacti-

vated in the basic settings.

~ "Basic settings" on page 15

The appliance

door cannot be

opened. The

symbol 1 lights

up in the display.

The appliance

door is locked

with the child-

proof lock.

Press and hold the v button until

the 1 symbol goes out in the dis-

play. Settings can be made on the

appliance.

The childproof lock with door lock

can be switched off in the basic

settings. ~ "Basic settings"

on page 15

The appliance

door cannot be

opened. The

symbol 5 lights

up in the display.

The appliance

door is locked

due to the

cleaning func-

tion.

Wait until the cooking compart-

ment has cooled and the

5 symbol goes out.

The appliance is

not heat-

ing."DEMO" is

shown on the dis-

play.

Demo mode

is activated.

Briefly disconnect the appliance

from the mains (switch off the cir-

cuit breaker in the fuse box) and

then deactivate demo mode

within approx. 5 minutes by

changing the basic setting ™‚„

to ‹. ~ "Basic settings"

on page 15

Home Connect

does not work

correctly.

Go to www.home-connect.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B6ACH7HH0B Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info