Bedienungsanleitung Neff C17E42N3 (Seite 8 von 32) (Englisch)

495352

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Before using the appliance for the first time

In this section, you can read about

ʋ How to set the clock after connecting up your appliance

ʋ How to clean your appliance before using it for the first time

Setting the clock

Note: When you press the .- clock function button, you have

3 seconds to set the clock using the rotary selector. Should this

have been insufficient for you, you can amend the clock time

later.

¯:¯¯ flashes in the clock display.

1. Briefly press the .- clock function button to go to the

setting mode.

The

.- and  symbols light up. ³:¯¯ appears in the

clock display.

2. Set the current time using the rotary selector.

Your setting is accepted after 3 seconds.

Changing the clock

To subsequently change the time, press the

.-clock function

button repeatedly until the

.- and  symbols light up again.

Change the time with the rotary selector.

Cleaning the appliance

Clean your appliance before using it for the first time.

1. Remove the accessories from the cooking compartment.

2. Completely remove any residual packaging (e.g. chips of

polystyrene) from the cooking compartment.

3. Clean the accessories and cooking compartment with hot

soapy water (see section: Cleaning and care).

4. Heat with  Top/bottom heat at 240 °C for 60 minutes.

5. Afterwards, wipe the cooled cooking compartment with hot,

soapy water.

6. Clean the outside of the appliance with a soft, damp cloth

and soapy water.

Operating the appliance

In this section, you can read about

ʋ how to switch your appliance on and off

ʋ how to select an operating mode and temperature

ʋ how you can change the basic settings

ʋ when your appliance switches off automatically

Switching on the appliance

1. Turn the operating mode selector until the desired operating

mode is selected.

A default temperature appears on the temperature display.

2. Turn the temperature selector to change the default

temperature.

Notes

ʋ The ! EasyClean® and  Low-temperature cooking

operating modes can only be started if neither

 nor ¤ are

shown in the temperature display.

ʋ If no default temperature is displayed, the temperature of your

selected operating mode is a fixed setting. You cannot

change this temperature.

Retrofit kit, CLOU 2x telescopic railings Z1762X2

Bread-baking stone Z1912X0

Optional accessories Order no.

Operating mode Default temper-

ature in °C

Temperature

range in °C



CircoTherm® 160 40 - 200



Top/bottom heating 170 50 - 275



CircoTherm intensive 220 50 - 275



Circo-roasting 170 50 - 250



Full-surface grill 220 50 - 275

Full-surface grill

(intensive)*

Fixed setting



Centre area grill 180 50 - 275

Centre-area grill

(intensive)*

Fixed setting



Bottom heat 200 50 - 225

* Turn the temperature selector beyond 275 °C.

³ appears

in the temperature display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C17E42N3 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C17E42N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info