Bedienungsanleitung Neff C18FT48N0 (Seite 14 von 68) (Englisch)

621386

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

en Operating the appliance

4. After calibration, allow the appliance to heat up.

Caution!

Enamel damage

Do not start an operation if water is on the cooking

compartment floor. Before the operation, wipe the

water from the cooking compartment floor.

5. Dry the cooking compartment floor.

6. Set the heating type and temperature for heating up,

then start the appliance operation. ~ "Setting and

starting the appliance operation" on page 14

7. Keep the kitchen ventilated while the appliance is

heating up.

8. Stop the appliance operation after the indicated

duration. Use the # touch button to switch off the

appliance.

9. Wait until the cooking compartment has cooled

down.

10. Clean the smooth surfaces with soapy water and a

dish cloth.

11. Empty the water tank and dry the cooking

compartment. ~ "After every steam operation"

on page 19

Notes

■ So that the appliance adapts to a new installation

location after moving house, reset the appliance to

the factory settings. Repeat the initial use settings

and the calibration.

■ The appliance saves the calibration settings, even in

the event of a power cut or disconnection from the

mains.The calibration must not be repeated.

Cleaning the accessories

Clean the accessories thoroughly using soapy water

and a dish cloth or soft brush.

1Operating the appliance

Operating the appliance

You have already learnt about the controls and how

they work. Now we will explain how to set your

appliance. You will learn about what happens when you

switch the appliance on and off, and how to select the

operating mode.

Switching the appliance on and off

To switch the appliance on or off, touch the # touch

button.

After the appliance has switched off, the display shows

whether the residual heat in the cooking compartment

is high or low.

Notes

■ Certain indicators and instructions (e.g. about

residual heat in the cooking compartment) remain

visible on the display even when the appliance is

switched off.

■ After the appliance has completed an operation, you

will hear the cooling fan continuing to run until the

cooking compartment is cooled as much as

possible.

■ Switch off your appliance when you do not need to

use it. If no settings are made for a long time, the

appliance switches off automatically.

Setting and starting the appliance operation

Example: ‚ CircoTherm hot air at 170 °C

1. Touch the # touch button to switch on the

appliance.

You go directly to the ¢ Types of heating menu.

2. Swipe to the left or right to select the type of heating.

3. Touch the bottom line.

Heating up

Heating type Top/bottom heating ƒ

Temperature 240 °C

Cooking time 30 minutes

Display Temperature

Residual heat high above 120 °C

Residual heat low between 60 °C und 120 °C

&LUFR7KHUPKRWDLU





&

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C18FT48N0 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C18FT48N0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info