Bedienungsanleitung Neff C44R20N3 (Seite 8 von 24) (Englisch)

495367

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Before using for the first time

In this section you will find out which steps are required before

using the appliance for the first time:

■ setting the clock

■ changing the water hardness range if required

■ before first use

■ cleaning the accessories before use

Your appliance was thoroughly factory tested for proper

operation. As a result, there may already be a small amount of

condensation in the appliance.

Setting the clock

After connecting the appliance to the mains or after a power

cut, the symbols

KJ and 3 appear. ‹:‹‹ appears in the

display. Make the following settings:

1.Use the clock rotary selector to set the current time.

2.Press the KJ clock function button.

The current time is applied.

Note: If the time of day is not displayed after it is entered, the

clock display is switched off. To switch on the clock display,

press the clock function button

KJ until the time of day is

displayed.

Setting the water hardness range

Descale your appliance regularly. This is the only way to

prevent damage.

Your appliance automatically displays when it needs descaling.

It has been preset to water hardness range "medium". Change

the value if your water is softer or harder.

You can check the water hardness with the test strips supplied

or ask your water supplier.

If your water is very hard, we recommend that you use softened

water.

You can only dispense with descaling completely if you

exclusively use softened water. If this is the case, change the

water hardness to "softened".

You can change the water hardness in the basic settings:

1.Press the ~ main switch to turn on the appliance.

2.Press and hold the o button for 3 seconds to go to the basic

settings menu.

™‚ ‚ appears in the display.

3.Briefly press the o button repeatedly until ™… ƒ appears

(water hardness range "medium").

4.Turn the rotary selector to change the water hardness range.

Possible values:

5.Press and hold the o button for 3 seconds to exit the basic

settings menu.

The change is saved.

First use

Before first use, heat the empty appliance for 20 minutes at

100 °C. Do not open the appliance door during this time. The

appliance is automatically calibrated (see section: Automatic

calibration).

1.Press the ~ main switch to turn on the appliance.

2.Fill the water tank and insert it (see section: Filling the

water tank).

3.Press the 100° temperature button.

4.Press the … button.

The appliance heats up to 100 °C. The cooking time

(20 minutes) does not start to count down until the set

temperature has been reached. Do not open the appliance

door during this time.

The cooking operation ends automatically and an audible

signal sounds.

5.Press the ~ main switch to turn off the appliance.

Leave the appliance door ajar until the appliance has cooled

down.

Cleaning the accessories before use

Using soapy water and a soft cloth, clean the accessories

thoroughly before first use.

™… ‹

softened -

™… ‚

soft I

™… ƒ

moderate II

™… „

hard II

™… …

very hard IV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C44R20N3 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C44R20N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info