Bedienungsanleitung Neff C47C22N3 (Seite 10 von 36) (Englisch)

495368

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operating the appliance

In this section, you can read about

■ how to fill the water tank

■ how to switch the appliance on and off

■ what to note after each cooking operation

Filling the water tank

When you open the appliance door, you will see the water tank

on the right-hand side.

Caution!

Use of unsuitable liquids may damage the appliance

■ Only use fresh tap water, softened water or uncarbonated

mineral water.

■ If your tap water is very hard, we recommend that you use

softened water.

■ Do not use distilled water, highly chlorinated tap water

(> 40 mg/l) or other liquids.

You can obtain information about your tap water from your

water supplier. The water hardness can be checked with the

test strips enclosed.

Fill the water tank before each use:

1.Open the appliance door and take out the water tank (fig. A).

2.Fill the water tank with cold water up to the “max” mark (fig.

B).

3.Close the tank cover until you feel it engage.

4.Slide in the water tank all the way (fig. C).

The tank must be flush with the water tank recess (fig. D).

Switching on the appliance

: Risk of scalding!

When you open the appliance door and remove the cooking

containers, hot liquids may squirt out because the cooking

containers may have warped. When opening, do not stand too

close to the appliance. Open the appliance door carefully.

Remove the cooking container carefully. Keep children at a

safe distance.

Note: Always use the cooking container and wire rack in their

standard position (not the other way up).

1.Press the operating mode selector so that it pops out.

The appliance switches on.

2.Turn the operating mode selector until the required operating

mode lights up.

A default temperature appears on the temperature display.

3.Turn the temperature selector to change the default

temperature.

For operating modes that use steam, a default cooking time

appears in the clock display. The

KJ and x (cooking time)

symbols light up.

4.Turn the rotary selector to change the default cooking time.

The new cooking time is saved automatically after 3 seconds.

You can also set the cooking time for operating modes that

do not use steam (see section: Electronic clock).

5.Press the Start button.

If you do not press the Start button, an audible signal sounds.

When

é Steam cooking, the cooking time does not start until

the heating up time has elapsed.

Heating indicator

The heating indicator displays the rising temperature in the

cooking compartment.

■ Temperature reached (fig. A)

■ Appliance reheating (fig. B)

Current temperature

Press the

± info button.

The current temperature is displayed for 3 seconds.

PD[

Operating mode Temperature range Default cooking

time

Steam cooking 35 - 100 °C 20 minutes

CircoSteam® 120 - 230 °C 30 minutes

Hot air 30 - 230 °C -

Reheat 80 - 100 °C 10 minutes

$ %

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C47C22N3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C47C22N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info