Bedienungsanleitung Neff C49C62N3 (Seite 11 von 40) (Englisch)

495374

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

3. Turn the temperature selector to change the default

temperature.

For operating modes that use steam, a default cooking time

appears in the electronic clock. The

KJ and x (cooking

time) symbols light up.

4. Turn the rotary selector to change the default cooking time.

The new cooking time is saved automatically after 3 seconds.

You can also set the cooking time for operating modes that

do not use steam (see section: Electronic clock).

5. Press the Start button.

If you do not press the Start button, a signal sounds and

"Press Start button" appears in the text display.

When using

é Steam cooking, the cooking time does not start

until the heating-up time has elapsed.

"Fill water tank?" message

This message appears if you set an operating mode and the

water tank is only half full.

If you think that the water in the water tank is sufficient for the

cooking procedure, you can start the appliance. If not, fill the

water tank to the "max" mark, slide it back in and start the

appliance.

Heating indicator

The heating indicator displays the rising temperature in the

cooking compartment.

■ Temperature reached (fig. A)

■ Appliance reheating (fig. B)

Current temperature

Press the

± info button.

The current temperature is displayed for 3 seconds.

Displaying and changing the cooking time.

Press the

KJ clock function button repeatedly until the KJ

and

x symbols light up. The current cooking time is displayed.

Turn the rotary selector to change the cooking time. The

change is saved automatically.

Changing the temperature

You can change the temperature at any time. To change the

temperature, turn the temperature selector until the required

temperature is displayed.

Pause

Briefly press the Stop button to interrupt cooking (pause). The

cooling fan may continue running. Press the Start button to

restart.

If you open the appliance door during cooking, operation is

interrupted. Close the appliance door and press the Start

button to restart.

If you have switched on the Auto start, there is no need to

restart the appliance (see section: Basic settings).

"Fill water tank" message

If the water tank is empty, a signal sounds. “Fill water tank”

appears on the display. Cooking is interrupted.

1. Open the appliance door carefully.

N.B.: Hot steam will escape.

2. Remove the water tank, fill up to the "max" mark and slide the

tank back in.

3. Press the Start button.

Switching off the appliance

: Risk of scalding!

Hot steam may escape when the appliance door is opened.

Open the appliance door carefully during or after cooking.

When opening the door, do not lean over it. Ensure that,

depending on the temperature, steam is not visible.

Press and hold the Stop button to stop the cooking operation.

If you have set a cooking time, cooking is ended automatically.

A signal sounds. Press the

KJ clock function button to stop

the signal.

The cooling fan may continue to run when you open the

appliance door.

Turn the operating mode selector back to the

Û position and

push it in to turn off the appliance.

You can see in the temperature display whether there is high or

low residual heat in the cooking compartment.

After each use

Emptying the water tank.

1. Open the appliance door carefully.

Hot steam will escape.

2. Remove and clean the water tank.

3. Thoroughly dry the seal in the tank cover and the tank recess

in the appliance.

Caution!

Do not dry the water tank in the hot cooking compartment. This

will damage the water tank.

Drying the cooking compartment

: Risk of scalding!

The water in the evaporator dish may still be hot. Allow it to cool

before wiping.

1. Leave the appliance door ajar until the appliance has cooled

down.

2. Once it has cooled down, wipe out the cooking compartment

and the evaporator dish with the enclosed cleaning sponge

and dry well with a soft cloth.

3. Wipe away any drops of water which may have dripped onto

the lower bottom panel when the appliance door was

opened.

4. Remove food residues in the cooking compartment as soon

as the appliance has cooled down. Burnt-on remains will be

much harder to remove later.

5. Wipe units and handles dry where condensation has formed.

Operating mode Temperature range Default cooking

time

Steam 35 - 100 °C 20 minutes

CircoSteam® 120 - 230 °C 30 minutes

Hot air 30 - 230 °C -

Reheat 100 - 180 °C 10 minutes

Prove 35 - 50 °C 30 minutes

Defrost 35 - 60 °C 30 minutes

Slow cook 60 - 120 °C -

Plate warming 30 - 70 °C -

Keep warm 60 - 100 °C -

$ %

Temperature display Text display

•

Residual heat high

Residual heat low

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C49C62N3 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C49C62N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info