Bedienungsanleitung Neff D16EB12W0 (Seite 7 von 12) (Englisch)

633901

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

: Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Notes

■ Do not use any aggressive, acidic or alkaline cleaning

agents.

■ When cleaning the metal mesh grease filters, also clean the

holder for the metal mesh grease filters in the appliance

using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

Removing metal grease filter

1. Push the lock and then push the metal grease filter back and

pull it down.

While doing this, place your other hand under the metal

grease filter.

Note: To avoid causing damage, do not bend the metal

grease filter.

2. Take the metal grease filter out of the holder.

Note: Grease may accumulate in the bottom of the metal

grease filter. Hold the metal grease filter level to prevent

grease from dripping out.

3. After removing the metal grease filters, clean the inside of the

appliance.

4. Clean the metal grease filters and let them dry before re-

fitting them.

Installing the metal mesh grease filter

1. Insert the metal mesh grease filter.

While doing this, place the other hand under the metal mesh

grease filter.

2. Fold the metal mesh grease filter upwards, locking it in place.

Changing the activated charcoal filter (only in

circulating-air mode)

In order to guarantee efficient odour filtration, the filter must be

serviced regularly.

The activated charcoal filters must be replaced at least every

4 months.

Notes

■ The activated charcoal filters are not included in the delivery.

The activated charcoal filters can be obtained from specialist

retailers, from our after-sales service or from the Online Shop.

■ The activated charcoal filters cannot be cleaned or

reactivated.

Note: Only use genuine replacement filters. This ensures

optimal performance of the appliance.

1. Remove the metal grease filter, see the chapter Removing

the metal grease filter.

2. Undo the threaded joint on the activated charcoal filter cover.

3. Remove the activated charcoal filter.

4. Insert the activated charcoal filter.

5. Screw the cover in place.

6. Install the metal grease filter, see the chapter Installing the

metal grease filter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff D16EB12W0 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff D16EB12W0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info