Bedienungsanleitung Neff D49PU64X0 (Seite 6 von 20) (Englisch)

633877

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

en Operating the appliance

1Operating the appliance

Operating the appliance

These instructions apply to several appliance variants. It

is possible that individual features are described which

do not apply to your appliance.

Note: Switch on the extractor hood when you start

cooking and switch it off again several minutes after you

have finished cooking. This is the most effective way of

removing the kitchen fumes.

Control panel

Setting the fan

Switching on

■ Pull out the filter pull-out and touch the # symbol.

The fan will start at setting ƒ.

■ Touch the + or - symbol to alter the fan speed.

Note: When the filter pull-out is pushed in, only fan

settings ‚, ƒ and „ can be selected.

Switching off

Touch the # symbol. Slide in the filter pull-out.

Intensive setting

You can use the intensive setting if there is a large

build-up of odours and fumes/vapours.

Touch the ˜ symbol. ˜ƒ appears on the display. Touch

the - symbol to switch back to the ˜‚ intensive setting.

After approximately six minutes, the electronics

automatically reduce the fan to a lower setting . If you

want to end the intensive setting before the preset time

expires, touch the ˜ symbol.

Fan run-on time

Press - until the 9 symbol appears, or slide in the filter

pull-out.

After approximately 10 minutes, the fan will switch off

automatically.

Automatic mode

Switching on

■ Touch the # symbol.

The fan starts at setting ƒ.

■ Touch the ‘ symbol.

The optimum fan setting ‘‚, ‘ƒ or ‘„ is

automatically set via a sensor.

Switching off

Touch the ‘ or # symbol to switch automatic mode off.

The fan switches off automatically if the sensor no

longer detects a change in the air quality of the room.

Automatic mode can run for a maximum of four hours.

Sensor control

In automatic mode, a sensor in the extractor hood

detects the intensity of the cooking and roasting

odours. Depending on the sensor setting, the fan

automatically switches to another fan setting.

Default sensitivity setting: †

Lowest sensitivity setting: ‹

Highest sensitivity setting: Š

If the sensor control responds too quickly or too slowly,

it can be changed accordingly:

1. Press and hold the ‘ symbol for approximately four

seconds when the fan is switched on. The setting is

displayed.

2. The sensor control setting can be changed by

touching the + or - symbol.

3. To confirm the entry, press and hold the ‘ symbol

for approximately four seconds.

AirFresh function

Touch the 3 symbol until the ‚ 3 appears. The

fan runs for approximately five minutes per hour.

Touch the 3 symbol if you want to end the AirFresh

function.

Explanation

Fan on/off

Noise reduction

AirFresh function

Reduces the fan settings

+ Increases the fan settings

Intensive setting

‘

Automatic function

Light on/off/dimming

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff D49PU64X0 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff D49PU64X0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info