Bedienungsanleitung Neff D72FL86N0 (Seite 6 von 12) (Englisch)

633829

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Operation

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

Note: Switch on the extractor hood when you start cooking and

switch it off again several minutes after you have finished

cooking. This is the most effective way of removing the kitchen

fumes.

Control panel

Setting the fan

Note: Always adjust the fan strength to meet current conditions.

If there is a large build-up of steam or fumes, select a high fan

setting.

Switching on the appliance

1. Press the # button.

The fan starts at fan setting

ƒ.

2. Press the + or - buttons to set a different fan setting.

Switching off the appliance

Press the

# button.

Intensive setting

You can use the intensive setting if there is a large build-up of

odours and fumes/vapours.

1. Press the ˜ button.

Intensive mode

˜ƒ is activated.

2. Press the - button.

Intensive mode

˜‚ is activated.

Note: The run time of the intensive mode is

approx. 6 minutes. Once this time has elapsed, the appliance

switches back to a lower fan setting.

3. Press the ˜ button.

The intensive mode ends.

Fan run-on time

Press and hold the - button until – appears in the display panel.

After approx. 10 minutes, the fan switches off automatically.

AirFresh function

1. Press and hold the - button until 3‚ appears in the

display panel.

The fan runs for approx. 5 minutes per hour.

2. Press the # button.

The AirFresh function ends.

Noise reduction function

The noise reduction function reduces the fan noise.

Switching on the NoiseReduction function

The function is possible in all fan settings, except in fan

setting

‚. The function also remains active after the fan is

switched off.

Press the

4 button.

Switching off the NoiseReduction function

Press the

4 button.

Lighting

The lighting can be switched on and off independently of the

ventilation system.

Press the

6 button.

Setting the brightness

Press and hold the

6 button until the desired brightness is

reached.

Saturation display

When the metal grease filters are saturated, a signal sounds for

approx. 4 seconds after the fan is switched off.

The symbol

ª flashes on the display panel.

When this happens, do not delay cleaning the metal grease

filters any further; see section Cleaning and maintenance.

Resetting the saturation indicator

Press and hold the - button until the saturation indicator no

longer flashes.

The saturation indicator is reset.

Audible signal

Switching on the audible signal

When the fan is switched off, press and hold the

# and +

buttons for approx. 3 seconds. An audible signal sounds. The

audible signal is switched on.

Switching off the audible signal

When the fan is switched off, press and hold the

# and +

buttons for approx. 3 seconds. An audible signal sounds. The

audible signal is switched off.

Explanation

Fan on/off

Noise reduction

- Reduce the fan settings/fan run-on time/interval ventila-

tion

+ Increase the fan settings/intensive mode 1, 2

Direct selection of intensive mode 2

Light on/off/dimming

IUHVK

YRO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff D72FL86N0 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff D72FL86N0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info