Bedienungsanleitung Neff D72MT64N1 (Seite 8 von 12) (Englisch)

633827

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Removing metal grease filter

1. Open the lock and fold down the metal grease filter. While

doing this, place your other hand under the metal grease

filter.

2. Take the metal grease filter out of the holder.

Notes

■ Grease may accumulate in the bottom of the metal grease

filter.

■ Hold the metal grease filter level to prevent grease from

dripping out.

3. Clean the metal grease filter.

Cleaning the metal mesh grease filters

: Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Notes

■ Do not use any aggressive, acidic or alkaline cleaning

agents.

■ When cleaning the metal mesh grease filters, also clean the

holder for the metal mesh grease filters in the appliance

using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

Installing the metal mesh grease filter

1. Insert the metal mesh grease filter.

While doing this, place the other hand under the metal mesh

grease filter.

2. Fold the metal mesh grease filter upwards, locking it in place.

Trouble shooting

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out and damaged power cables replaced by one of our trained

after-sales technicians. If the appliance is defective, unplug the

appliance from the mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

LED lights

Defective LED lights must only be replaced by the

manufacturer, their customer service department or a licensed

technician (electrician).

Fault table

--------

Fault Possible cause Solution

The appliance does not work The plug is not plugged into the mains Connect the appliance to the power

supply

Power cut Check whether other kitchen appliances

are working

The fuse is faulty Check in the fuse box to make sure that

the fuse for the appliance is in working

order

The lighting does not work The bulbs are faulty Call the after-sales service

”ªª flashes

The metal grease filter is saturated Clean the filter, see the Cleaning and

maintenance section

’ªª flashes

The activated charcoal filter is saturated Replace the filter; see the "CleanAir air

recirculation module" printed supple-

ment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff D72MT64N1 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff D72MT64N1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info