Bedienungsanleitung Neff D76MH52N0 (Seite 9 von 16) (Englisch)

540383

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Removing metal mesh grease filter

1. Open the lock and fold down the metal grease filter. While

doing this, place the other hand under the metal grease filter.

2. Take the metal grease filter out of the holder.

For edge extraction filters, pull the metal grease filter

downwards. While doing this, place the other hand under the

metal grease filter.

For additional filters, open the lock and fold down the metal

grease filter. While doing this, place the other hand under the

metal grease filter.

Notes

■ Grease can accumulate in the bottom of the metal grease

filter.

■ Hold the metal grease filter level, otherwise grease will drip

out.

3. Clean the metal grease filter.

Installing the metal mesh grease filter

1. Insert the metal mesh grease filter.

While doing this, place the other hand under the metal mesh

grease filter.

2. Fold the metal mesh grease filter upwards, locking it in place.

Trouble shooting

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out and damaged power cables replaced by one of our trained

after-sales technicians. If the appliance is defective, unplug the

appliance from the mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

Malfunction table

--------

Replacing bulbs

: Risk of electric shock!

When changing the bulbs, the bulb socket contacts are live.

Before changing the bulb, unplug the appliance from the mains

or switch off the circuit breaker in the fuse box.

Important Only use a bulb of the same type and same power

(see the bulb holder or rating plate inside the appliance) – to

do this, remove the metal mesh grease filter.

Replacing halogen bulbs

Note: When inserting halogen bulbs, do not touch the glass

tube. Use a clean cloth to insert the halogen bulbs.

1. Carefully remove the bulb ring using a suitable tool.

2. Pull out the bulb and replace it with a bulb of the same type.

3. Insert the bulb cover.

4. Insert the mains plug or switch on the fuse again.

LED lights

Defective LED lights may be replaced by the manufacturer, their

customer service or a qualified technician (electrician) only.

: Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly into the

switched on LED lights for longer than 100 seconds.

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged in.

Connect the appliance to

the electricity supply

Power cut Check whether other

kitchen appliances are

working

Faulty fuse Check in the fuse box to

make sure that the fuse for

the appliance is OK

The lighting

does not work.

The bulbs are

faulty.

For information on chang-

ing the bulbs, see the

"Replacing Bulbs" section.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff D76MH52N0 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff D76MH52N0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info