Bedienungsanleitung Neff I90CN48W0 (Seite 8 von 12) (Englisch)

633882

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

Installing the metal mesh grease filter

1. Insert metal grease filter.

2. Fold the metal grease filter up and click it into place.

3. Fold the filter cover upwards.

Note: Make sure that the filter cover closes properly.

Resetting the saturation displays

Once you have cleaned or replaced the relevant filters, reset

the saturation indicator to stop the symbols from flashing.

Make sure that the extractor hood and the lighting have been

switched off.

Press and hold the # button until indicator F flashes three

times.

This resets the saturation indicators.

Trouble shooting

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out and damaged power cables replaced by one of our trained

after-sales technicians. If the appliance is defective, unplug the

appliance from the mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

LED lights

Defective LED lights may be replaced by the manufacturer, their

after-sales service or a qualified technician (electrician) only.

Malfunction table

--------

Replacing the batteries in the remote control

1. Push in the lug.

2. Remove the cover.

3. Remove the batteries.

4. Correctly insert the new batteries (AAA/LR03/1.5 V).

Note: Dispose of flat or faulty batteries in accordance with local

regulations.

Note: Do not dispose of batteries along with general household

waste.

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged into the

mains

Connect the appliance to

the power supply

Power cut Check whether other

kitchen appliances are

working

The fuse is

faulty

Check in the fuse box to

make sure that the fuse for

the appliance is in working

order

The lighting

does not work.

The LED lights

are defective.

Call the after-sales service.

The button illu-

mination does

not work.

The control unit

is faulty.

Call the aftersales service.

The F indicator

and the

# button light

up or the

F indicator and

the

8 3 button

light up.

The grease filter

or the activated

charcoal filter is

saturated.

Clean the filter or regener-

ate or replace the activated

charcoal filter; see the

Cleaning and maintenance

section.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff I90CN48W0 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff I90CN48W0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info