Bedienungsanleitung Neff T43D90N2 (Seite 24 von 44) (Englisch, Spanisch)

540327

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Changing or cancelling the time

Selecting the hotplate . Press the

3 symbol and change the

cooking time with the + or - symbols, or set to

‹‹.

Once the time has elapsed

The hotplate switches off. A warning signal sounds and

‹‹

appears for 10 seconds in the time program function display.

The

x indicator on the hotplate lights up. Pressing the 3

symbol turns off the indicators and stops the beeping.

Notes

■ If cooking times have been programmed for various

hotplates, the time programming function always displays the

time for the selected hotplate.

■ Any cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

No hotplate should be selected.

1. Press the 3 symbol. ‹‹ and the symbol are shown in the

time program function display

2. Press the + or - symbols. The basic setting appears.

+ symbol: 10 minutes.

- symbol: 5 minutes.

3. Set the desired time using the + or - symbols.

After a few seconds, the time will start to elapse.

Changing or cancelling the time

Press the

3 symbol several times until the W indicator lights

up. Change the time or set it to

‹‹ with the + or - symbols.

Once the time has elapsed

A warning signal sounds.

‹‹ is displayed on the time program

function display. After 10 seconds the indicators turn off.

Pressing the

3 symbol turns off the indicators and stops the

beeping.

Keep warm function

This function is used for melting chocolate or butter and for

keeping food warm.

To activate

1. Select the hotplate.

2. Within the next 10 seconds, press the – symbol.

The indicator

–lights up.

The "keep warm" function will have been activated.

To deactivate

1. Select the desired hotplate.

2. Press the – symbol.

The

–indicator disappears.

The hotplate turns off and the residual heat indicator appears.

Cleaning lock function

Cleaning the control panel while the hob is switched on may

change the settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

" symbol. A signal sounds. The Ú indicator lights up

along with the

" symbol. The control panel is locked for

35 seconds. The control panel surface can now be cleaned

without the risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

”, ‰ symbol and the residual

heat indicator

œ/• flash alternately in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff T43D90N2 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff T43D90N2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info