Bedienungsanleitung Neff T50BS41N0 (Seite 15 von 36) (Englisch)

633813

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Flex Zone en

|Flex Zone

Flex Zone

You can use the hob as a single hotplate or as two

independent hotplates, as required.

It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As two independent hotplates

The flexible cooking zone is used like two independent

hotplates.

Activating

See section ~ "Operating the appliance"

As a single hotplate

Using the entire cooking zone by connecting both

hotplates.

Linking the two hotplates

1. Set down the cookware. Select one of the two

hotplates in the flexible cooking zone and set the

heat setting.

2. Touch the { symbol. The u indicator lights up.

The flexible cooking zone is activated.

Note: The heat setting appears in the two displays for

the flexible cooking zone.

Changing the heat setting

Select one of the two hotplates assigned to the flexible

cooking zone and set the heat setting using the twist

knob.

Adding new cookware

Set the new item of cookware down, select one of the

two hotplates in the flexible cooking zone and then

touch the { symbol twice. The new cookware is

detected and the previously selected heat setting

remains the same.

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Disconnecting the two hotplates

Select one of the two hotplates assigned to the flexible

cooking zone and touch the { symbol.

This deactivates the flexible cooking zone. The two

hotplates will now function independently.

Note: If the hotplate is switched off, and then switched

back on again later, the flexible cooking zone is reset to

function as two independent hotplates.

As a single hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the four posi-

tions that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the three

positions that can be seen in the illustration.

If the cookware covers more than one hot-

plate, place it on the right- or left-hand edge

of the flexible cooking zone.

As two independent hotplates

The outer and inner hotplates each have two

inductors and can be used independently of each

other. Select the required heat setting for each of

the hotplates. It is advisable to only use one item

of cookware per hotplate.

Recommendations

If the hob has more than one flexible cooking zone, set the cookware

down so that it covers only one of the flexible cooking zones.

Otherwise the hotplates will not be activated correctly and the cooking

result will not be satisfactory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff T50BS41N0 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff T50BS41N0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info