Bedienungsanleitung Neff T54T55N2 (Seite 29 von 48) (Englisch, Spanisch)

540338

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Accessing the basic settings

The hob should be turned off.

1. Switch on the hob.

2. Within the next 10 seconds, press the 3 symbol for 3

seconds.

™‚ and ‹ light up on the display as the default setting.

3. Press the 3 symbol several times until the desired function

indicator appears.

4. Then select the desired setting using the Tipp control.

5. Press the 3 symbol again for more than 3 seconds.

The settings should be correctly saved.

Quit

To leave the basic settings, turn off the hob at the main switch.

Care and cleaning

The advice and warnings contained in this section aim to guide

you in cleaning and maintaining the hob, so that it is kept in the

best possible condition

Hob

Cleaning

Clean the hob after each use. This prevents food remains left

on the surface from burning. Wait until the hob is cool enough

before attempting to clean it.

Only use cleaning products specifically designed for hobs.

Follow the instructions provided on the packaging.

Do not use:

■ Undiluted washing-up liquid

■ Dishwasher detergent

■ Abrasive products

■ Corrosive products such as oven sprays or stain removers

■ Sponges that may scratch

■ High-pressure or steam cleaners

The best way to remove stubborn stains is to use a glass

scraper. Follow the manufacturer's instructions.

Suitable glass scrapers can be obtained through the Technical

Assistance Service or from our online shop.

Hob frame

In order to avoid damage to the hob frame, follow the

indications below:

■ Use only slightly soapy hot water

■ Do not use sharp or abrasive products

■ Do not use a glass scraper

The Tipp control

For cleaning the Tipp control, warm water and a little soap is

recommended. Do not use abrasive or corrosive cleaning

products. Do not clean the Tipp control in a dishwasher or in

washing up water. Otherwise, it could be damaged.

Fixing malfunctions

Malfunctions are generally caused by minor faults. Before

contacting the Technical Assistance Service, ensure you have

read the following recommendations and warnings.

Indicator Malfunction Measure

none The electric power supply has been cut off. Check other electrical appliances to check whether there has been a

power cut.

The appliance has not been properly con-

nected following the connection diagram.

Check that the appliance has been connected properly according to

the connection diagram.

Electronic system malfunction. If the malfunction is not resolved by the above checks, contact the

Technical Assistance Service.

“ flashing

The control panel is wet or an object is

resting on it.

Dry the control panel area or remove the object.

* If the indicator persists, call the Technical Assistance Service.

Do not rest hot pans on the control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff T54T55N2 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff T54T55N2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info