Bedienungsanleitung Neff T55T86X2 (Seite 25 von 44) (Englisch, Spanisch)

621703

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Changing or cancelling the time

select the hotplate using the Tipp control. Press the

3 symbol

and change the cooking time using the Tipp control, or set to

‹‹.

Once the time has elapsed

The plate is turned off. The warning signal sounds, the hotplate

displays

‹ and the time program function screen displays

‹‹for one minute. The x indicator of the hotplate flashes.

Pressing any symbol turns off the indicators and stops the

beep.

Notes

■ If cooking times have been programmed for various plates,

the time program function displays the shortest cooking time.

The

x indicator of the hotplate lights up.

■ To check the remaining cooking time of a hotplate: select the

hotplate using the Tipp control. The cooking time will be

displayed for five seconds.

■ Cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

No hotplate should be selected.

1. Press on the 3 symbol, and the time program function

display shows

‹‹.

2. Select the required time using the Tipp control.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

3 symbol and change the time using the Tipp

control, or set to

‹‹.

Once the time has elapsed

A warning beep sounds. The time program function displays

‹‹ and the indicator V comes on. Pressing any symbol turns

off the indicators and stops the beeping.

Keep warm function

The plate-warming plate is used for melting chocolate or butter,

and for keeping food warm.

To activate

1. Select the required hotplate using the Tipp control.

2. Within the next 5 seconds, press the – symbol.

The

– indicator lights up.

The "keep warm" function has been turned on.

To turn off

1. Select the required hotplate using the Tipp control.

2. Press the – symbol.

The

– display turns off.

After five seconds, the hotplate turns off and the residual heat

indicator appears.

Cleaning lock function

Cleaning the control panel while the hob is switched on may

change the settings.

In order to avoid this, the hob has a cleaning lock function.

Remove the Tipp control. A signal sounds and the

" indicator

lights up. The control panel is locked for 35 seconds. The

surface of the control panel can now be cleaned without risk of

changing the settings.

Note: The lock does not affect the main switch. The hob may

be turned off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. On the hotplate display,

”and ‰

flash alternately.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff T55T86X2 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff T55T86X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info