Bedienungsanleitung Neff XB18 (Seite 36 von 56) (Deutsch)

731584

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Automatic safety cut-out

Setting the correct time

Use the

3 symbol to select the kitchen timer and reset

the time.

bAutomatic safety cut-out

Au t o mat i c safety cut - out

If a hotplate has been switched on for a long time

without the setting being changed, the automatic time

limit is activated.

The hotplate stops heating. ”‰ and the •/œ residual

heat indicator flash alternately on the hotplate display.

The display goes out when you touch any control. You

can make new settings.

When the time limit is activated depends on the heat

setting selected (1 to 10 hours).

zKeep warm function

Ke e p wa r m f unct i on

The Keep warm function is suitable for melting

chocolate or butter and for warming food and cookware

Switching on the keep-warm function

1. Select the hotplate.

2. Touch the L symbol.

– appears in the heat setting display. The keep-warm

function is switched on.

Switching off the keep-warm function

1. Select the hotplate.

2. Touch the L symbol. ‹ lights up on the heat setting

display.

The keep-warm function is switched off.

kWipe protection

Wipe pr ot ect i on

If you wipe over the control panel while the hob is

switched on, settings may be changed.

To prevent this from happening, your hob has a wipe

protection function. Touch the z symbol. A beep goes

off. The display light above the z symbol lights up. The

control panel is locked for 30 seconds. You can now

wipe over the control panel without changing any

settings.

Note: The primary switch is not affected by the wipe

protection function. You can switch off the hob at any

time.

[Energy consumption

indicator

Ener gy consumpt i on indicator

You can use this function to display the total energy

consumption between switching the hob on and off.

Once switched off, the energy consumption is displayed

in kilowatt hours (e.g. 1.08 kWh) for 10 seconds

The accuracy on the display depends on the voltage

quality of the power supply, among other factors.

The display has not been activated. You can find out

how to activate the display in the Basic settings

section.~ Page 36

QBasic settings

Ba s i c set t i ngs

Your appliance has various basic settings. You can

adjust these settings to meet your own needs.

Display Function

™‚

Automatic child safety lock

‹

Switched off.*

‚

Switched on.

Manual and automatic child safety lock switched off.

™ƒ

Beeping sound

‹

Confirmation signal and operation error signal are

switched off (primary switch signal always remains).

‚

Only the operation error signal is switched on.

Only the confirmation signal is switched on.

„

Confirmation signal and operation error signal switched

on.*

™„

Energy consumption display (Ask your electric com-

pany what the mains voltage is)

‹

Consumption display switched off.*

‚

Consumption display with mains voltage at 230 V.

Consumption display with mains voltage at 400 V.

„

Consumption display with mains voltage at 220 V.

…

Consumption display with mains voltage at 240 V.

*Basic setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff XB18 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff XB18

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info