Bedienungsanleitung Nero Burning Rom 6 (Seite 42 von 156) (Englisch)

616521

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Nero Creating a CD/DVD • 42

13. Confirm your selection by clicking on the Burn button. All the selected steps

now run in sequence until writing is complete. You can monitor progress in a

status window which shows the individual steps being logged as they are

executed. A typical final message would be: 'Burn process was successful

with 12x (1800 KB/s)‘. The CD is then ejected. The messages shown can

either be saved, printed or discarded. Close the window by clicking on the

Discard or Close buttons.

14. You can now check what has been written to your new CD by inserting it

again and clicking the 'CD Info’ icon.

7.3.6 Creating a Multisession CD (Finish)

In this section we show you step by step how to use Nero to continue and finish

an existing Multisession CD so that it is write protected and no further writing is

possible.

All settings may be left at their default values.

1. Load the Multisession CD you wish to continue into the recorder.

2. Start a new compilation by clicking on the appropriate button or the File

menu and the command New.

3. Click the 'CD-ROM (ISO)' icon - the Multisession tab is in front. Use the tabs

to specify the attributes of the compilation, such as the name of the CD,

different characteristics and restrictions.

4. Activate the 'Continue Multisession CD' option to create an ISO CD.

For a Multisession CD with linked files, activate the two checkboxes 'Replace

files in compilation' and 'Add new files to compilation' in the 'Options'

section.

For a Multisession CD with independent files, clear the two checkboxes

'Replace files in compilation' and 'Add new files to compilation' in the

'Options' section – this will ensure that Nero will not search for links to

existing files on the CD.

5. On the ISO tab you can toggle between Mode 1 and Mode 2/XA format as

required. You should not need to verify the format – in the past there were

problems with CD drives that could not read Mode 1 CDs, but very few of

these drives should still be in use today. If these options are grayed it means

that selection is not logically meaningful at present. Mixing Mode 1 and Mode

2/XA tracks on a CD would result in an unreliable and potentially unreadable

CD format.

In the 'File/Directorynames length‘ section you can specify the ISO level for

the length of the names. Up to 31 characters are permitted for Windows 95

and higher. Names cannot be more than 11 characters long for Windows 3.1

(8 for the name and 3 for the extension). ISO Level 2 will be best in most

cases – if you know that the CD must also be readable on a Windows 3.1

system then you should select Level 1.

6. On the Label tab you can give your CD a name and overtype the default

name 'New'. You can use letters A-Z, digits 0-9 and the underscore character

(_) – diacritics (accents) and spaces are not supported.

7. On the Dates tab you can specify the date of the compilation and of its files.

The current date and time are entered for the compilation as default, also the

creation date of the files.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nero Burning Rom 6 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nero Burning Rom 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info