Bedienungsanleitung Nero Burning Rom 6 (Seite 49 von 156) (Englisch)

616521

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Nero Creating a CD/DVD • 49

11. Open the drive with the File Browser and compile the CDA files for the

second Audio CD with Drag&Drop as described above in Point 8.

Repeat the last three steps for each additional CD you wish to use.

12. Click on the Burn Compilation button or select the Burn Compilation

command from the 'Recorder' menu to open the write dialog box. This option

is only available when the compilation window is selected, as can be seen

from the fact that the title bar is blue. If the File Browser is selected (and the

title bar of the compilation window is therefore grayed) the option is not

available and CD writing cannot be started. In this case click anywhere in the

compilation window.

The ‘Burn Compilation‘ dialog box now opens - it is the same as when

creating a new compilation but the Burn tab is now in front.

Important: Do not deactivate the 'Disc-at-once' checkbox if it is already

selected. If the checkbox is not active the CD will be written in the 'Track-at-

once' mode which may result in hiss and crackle between tracks.

13. Click the Burn button to start the burning process. All the selected steps now

run in sequence until writing is complete. You can monitor progress in a

status window which shows the individual steps being logged as they are

executed.

14. If you selected the reference strategy when you compiled the tracks, Nero

can prompt you to insert the required CD while writing is in progress.

15. A typical final message would be: 'Burn process was successful with 12x

(1800 KB/s)‘. The CD is then ejected. The messages shown can either be

saved, printed or discarded. Close the window by clicking on the Discard or

Close buttons.

16. You can now check what has been written to your new Audio CD by inserting

it again and clicking the 'CD Info’ icon.

Important: If your burned Audio CDs crackle, hum or hiss, you probably have

problems with the so-called 'Audio Jitter Effect'. This is due to basic problems

which the hardware has when reading audio data and has nothing to do with

Nero.

You will find further information in these chapters: '

Setting speed on CD/DVD-

ROM drives' and '

Verifying audio read quality'.

7.4.5 Burning audio files from your hard disk

1. If the audio files you wish to burn are already on your hard disk then you can

skip this point and continue from point 2.

If the audio tracks you wish to burn are not on your hard disk, then

 copy them first to your hard disk with Windows Explorer if they are WAV,

MP3 or other audio formats and you do not intend to convert them to

another format, or

 save the tracks to your hard disk if they are Audio CDs and the files are in

CDA format or if you wish to compress audio files. The chapter '

Saving

audio tracks' tells you how to do this.

2. Insert an empty CD-R into the CD recorder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nero Burning Rom 6 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nero Burning Rom 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info