Bedienungsanleitung Nestor Martin S33 (Seite 17 von 48) (Englisch, Spanisch)

571179

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Brass fittings

Any proprietary brass cleaner may be used to clean the

brass on the stove, but care must be taken to ensure

the polish does not come into contact with the stove

enamel or the black cast finish, where it will leave a

stain.

Nickel fings

Any proprietary chrome or aluminium cleaner may be

used to clean the decorave fings on the stove, but care

must be taken to ensure the polish does not come into

contact with the stove enamel or the black cast finish,

where it will leave a stain.

Soot

When wood is burned slowly, it produces tar and other

organic vapours, which combine with expelled

moisture to form creosote. The creosote vapours

condense in the relatively cool chimney flue of a slow

burning fire. As a result, creosote residue accumulates

on the flue lining. When ignited, this creosote makes

an extremely hot fire.

The chimney connector and chimney should be

inspected at least once every two months during the

heating season to determine if a creosote build-up has

occurred. The chimney connector must be in good

condition and kept clean. If creosote has accumulated

(1/8“ (3 mm) or more) it should be removed to reduce

the risk of a chimney fire. Experienced chimney

servicing personnel should be consulted. Establish a

routine for the fuel, wood burner and firing technique.

Check daily for creosote build-up until experience

shows how often you need to clean to be safe. Be

aware that the hotter the fire, the less creosote is

deposited. Weekly cleaning may be necessary in mild

weather even though monthly cleaning may be enough

in the coldest months.

AT THE END OF THE SEASON

Clean the unit, the flue outlet, and the chimney at the

end of each heating season or more often if the use of

the stove, or the fuel make it necessary. For cleaning

purposes the baffle plates can be removed without any

tools. This gives access to the cleaning flap of the

smoke flue and it is even possible to reach the flue

outlet. It also allows the removal of the catalyst box on

the Catalytic Hybrid Woodbox variants for examination

and sweeping of the ﬂue.

Ashes shall be removed, and disposed of in a steel

container with a tightly fitting lid and moved outdoors

immediately. Remove all internal parts to expose any

remaining ash and cinders and remove, close all the

stove doors. If the room is damp, possibly place some

absorbent crystals inside the stove or spray any

internal metal surfaces with water repelling spray.

Using a suitable oil lubricate all moving parts including

door latches and handle shafts.

Enamelled parts and repair

Porcelain enamel, when heated to high temperature, is

subject to crazing. Crazing is a normal occurrence when

enamel is exposed to high temperatures. Your enamel

finish will not be harmed nor will the function of the

stove be impaired.

The enamel surface of the stove may become chipped

if it is hit with a hard object such as a coal shovel or

operating tool. Suitable cold enamel touch up paint

may be purchased.

To prepare the surface remove any loose or flaking

enamel finish and brush or vacuum the area to remove

any dust and dirt.

If the touch up is supplied in a bole shake vigorously for

a minute to mix the contents. If supplied in a tube

squeeze out some of the contents onto a clean sheet

of paper and mix with a match sck as it may have

become separated in the tube.

Apply a thin layer of touch up to the surface allowing it

to dry before applying further layers to build the

surface up to the surrounding enamels height. Leave to

dry before firing the stove.

CATALYTIC HYBRID WOODBOX SYSTEM

It is important to periodically inspect the Catalytic

Hybrid Woodbox system to ensure that it is functioning

properly and determine when it needs to be replaced.

A non-functioning Catalytic Hybrid Woodbox system

will result in a loss of heating efficiency, and an

increase in creosote and emissions. Catalysts should be

visually inspected at least three times during the

heating season to determine if physical degradation

has occurred.

Inspect the catalysts for any fly ash or clogging, and

remove with a soft bristled brush or vacuum crevice

tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nestor Martin S33 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nestor Martin S33

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info