Bedienungsanleitung NetBotz NBWL0455 (Seite 25 von 154) (Englisch)

646452

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

16NetBotz Appliance User’s Guide

Sensor Data Pane

Located in the lower-left hand corner of the interface, the Sensor Data pane displays the readings and

alert status of sensors associated with the selected device in the Navigation pane. If the selected device is

an output relay device, the state of the relay is displayed.

If the selected device features a large number of sensors, the sensors may be divided into sensor sets. Use

the Set drop-down list to select either a specific sensor set or All Sensors.

Right-clicking on a sensor in the Sensor Data Pane reveals a drop-down menu with the following

options:

• Configure sensor...

Select this option to display the Sensor Configuration window, where you can modify the

settings and thresholds for the available sensors.

• View graph

Select this option to display the Graph View pre-populated with the current sensor.

• View History

Select this option to display the History View pre-populated with the current sensor.

Action/Information Pane

Use the Action/Information pane, located on the right-hand side of the interface, to view information and

perform configuration tasks on your appliance and pods. The following views are available from the

Action/Information pane:

• Camera View: This view displays live video captured by the appliance, cameras connected to the

appliance, or IP cameras on your network that are shared through the appliance. You can listen to

an audio stream from a selected camera pod or CCTV adapter pod and transmit audio from a

microphone connected to a computer running Advanced View to a selected camera pod or CCTV

adapter pod. If relay outputs are associated with a camera pod, buttons for each switch or relay

appear on the camera image to which they correspond.

See “Output Control” on page 53.

• Alerts View: This view displays alerts and resolved alerts reported by the appliance, any pods

connected to the appliance, or any devices being monitored by scanners.

• Maps View: This view displays maps that you configure for use with the appliance. A device

with a red background has an alert status. A device with a green background has a status of OK.

• Graph View: This view displays a graph of up to 24 hours of environmental data collected from

any sensors or devices associated with an appliance.

• History View: This view displays a historical set of data for a chosen appliance or sensor set. This

data can be exported to a text file for import into another application.

• Configuration View: Use this view to configure your appliance, pods connected to the appliance,

and sensors, plus various other system settings and features.

• About View: This view displays information about your appliance and all connected pods.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NetBotz NBWL0455 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info