Bedienungsanleitung NetBotz NBWL0455 (Seite 30 von 154) (Englisch)

646452

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

21NetBotz Appliance User’s Guide

Viewing Live Video

Click the Camera View button in the Action/Information pane to view live video captured by the

appliance, cameras connected to the appliance, or shared IP cameras on your network. Controls are

applied to the top-most camera image. Click an image to change its position to the top. To view all

camera images side by side, click the Tiled check box.

For information on shared IP cameras, see “Pod, Pelco Camera, and Rack Access PX-HID

Sharing” on page 93.

Standard camera controls

Control Description

Mode To change the size of the image, right-click the camera image, and select Configure

Camera. Select Settings, and, from the Mode drop-down list, choose dimensions

(resolution) for the image. The dimensions 640x480, for example, mean 640 pixels wide by

480 pixels high. NOTE: As the image dimensions increase, the maximum image rate

available will decrease.

Rate To change the frame rate, that is, the frequency that the video image is updated, make a

selection from the Refresh Rate drop-down list in the Camera View. NOTE: The

maximum rate available is determined by the mode setting (described above) and, if

applicable, the image quality settings.

NOTE: The maximum frame rate for shared IP cameras is limited to 15 frames per second.

For more information on image quality settings, see “Capture settings” on page 38.

For more information on shared IP cameras, see “Pod, Pelco Camera, and Rack Access PX-

HID Sharing” on page 93.

Zoom This zoom feature does not apply to Pelco PTZ cameras. See “Pelco PTZ camera controls”

on page 22 for details on the zoom features for Pelco PTZ cameras.

1. To avoid distortions, right-click the camera image and select Maintain aspect ratio.

2. Within the camera image, click and drag to draw a box around the area of interest.

3. Right-click the camera image and select Zoom in.

4. To return to the full camera image, right-click and select Zoom out.

Only available when a microphone is connected to the NetBotz appliance or a pod. Click to

listen to streaming audio. Click again to turn off the audio.

†

Only available when speakers are connected to the NetBotz appliance or a pod. Click and

hold the button while speaking into your system microphone. NOTE: While transmitting

audio, you will not be able to hear audio from the device.

†

These audio features are only available when the Advanced Software Pack has been installed on

the system running Advanced View. The Advanced Software Pack is included with a NetBotz 550

or NetBotz 570 appliance, but must be purchased separately when using any other NetBotz

appliance. To check if the software pack has been installed, click the Configuration button, then

click License Keys from the Appliance Settings area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NetBotz NBWL0455 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info