Bedienungsanleitung NetBotz NBWL0455 (Seite 74 von 154) (Englisch)

646452

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

65NetBotz Appliance User’s Guide

Authorization card swipes. There are two levels of authorization for cards in the Rack Access

System. A Level One card does not require authorization from another card to access assigned doors. A

Level Two card has the “Requires authorization card swipe” checkbox selected. When a Level Two card

is swiped, it must be followed by a swipe from a Level One card before the Auto-Lock timer expires in

order to access the door. Both cards must have valid access to the door in order for access to be granted.

If the Auto Lock timer expires without the Level One swipe, the Level Two card must be swiped again

before the authorization swipe can occur.

If a door is “assigned” to a card, it means that the card is authorized to access that door. As part of the

assigning process, a schedule is created that controls when the card is authorized to access the door.

Registering a card manually

If you have the ID for a card, you can manually register the card. To manually register a card:

1. Click Add... on the Rack Access System dialog.

2. Enter the Card ID, User Name, and Description. The Card ID and User Name fields are required.

Note: The Card ID field is only validated against previously registered cards (and cards in the

Unregistered Cards list). Also, the Card ID does not necessarily correspond to the printed

information on a card. Entering the printed text may not properly register the card.

Editing card information

To edit the information on an existing card:

1. Select the card from the list of registered cards.

2. Click Edit...

3. Change the necessary information.

Deleting a card

To delete a registered card:

1. Select the card from the list of registered cards.

2. Click Remove.

3. Click Yes to confirm the deletion, or click No to cancel. The card will still be listed in italicized

red font in the list. In order to remove the card, you must either click OK or Apply to commit the

changes. You will not be able to re-enter the card into the Unregistered Card list until the change

is committed.

Assigning doors to a card

Access to the hardware protected by a Rack Access System is achieved by assigning doors to the various

cards registered to your appliance. Each card can have access to multiple doors, and can also be limited

to a scheduled time of access that can be different for each door.

If a door is already assigned to the card, it is shown in italicized font in both the Assigned Doors and All

Available Doors panes.

Note: If you have assigned a door to a card but still cannot access the door with the card,

check to make sure that the access schedule is set correctly. An assigned door with no valid

access times is equivalent to an unassigned door. Also, make sure that you have applied your

changes by clicking Apply at the bottom of the dialog before they become active.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NetBotz NBWL0455 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info