Bedienungsanleitung Netgear Arlo Go (Seite 4 von 9) (Englisch)

681335

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Arlo Go Quick Start Guide

What’s Included

Arlo Go camera

Rechargeable

battery

Power adapter

(varies by region)

Mount

Mount screws

Get the Arlo App

arlo.netgear.com

For the best experience, download the Arlo app for your smartphone

by scanning this QR code.

Insert the SIM Card

Into Your Arlo Go Camera

¾ To insert a SIM card:

1. Unlock the battery compartment by

pressing and holding the latch.

2. Gently pull the battery door back to

open the compartment.

3. Align the gold SIM contacts.

4. Insert the SIM card into the SIM card

slot.

SD card slot

SIM card slot

The camera uses a mobile network to send pictures and videos to

your Arlo account in the cloud. Before using the Arlo Go camera, you

must install a SIM card.

Note: To obtain a SIM card, contact your mobile network service provider.

Insert the Battery

Into Your Arlo Go Camera

If power is available, you can plug your camera in and use it in

powered mode. We recommend that you insert the battery into your

Arlo Go camera even if you plan to power the camera using the power

adapter.

¾ To insert the battery:

1. Unlock the battery compartment by pressing and holding the

latch.

2. Gently pull the battery door back to open the compartment.

To use Arlo Go, make sure that the SIM card is active, that there

is data in your account, and that any existing SIM PIN is deactivated

or disabled.

3. If you plan to store video recordings on an

SD card, insert the SD card now.

The camera comes with an SD card slot

that supports SD cards (sold separately)

with a capacity of up to 32 GB of storage.

If you inserted an SD card and your camera

is oine, the camera recordings are stored

on the SD card.

Note: You must insert the SD card before powering

the camera on.

4. Align the battery contacts.

5. Insert the battery.

6. Close the battery door.

SD card slot

Use the Arlo app and your Arlo account to set up your Arlo Go camera.

If you already set up an Arlo account, you can add the Arlo Go camera

to your account.

During setup, your Arlo Go camera must be connected to the mobile

network.

Note: This requires that you are using a compatible device and that you

subscribe to a mobile service plan.

After you add your Arlo Go camera to your Arlo account, you can

place the Arlo Go camera anywhere in your mobile network coverage

area.

For information about optimizing mobile connectivity, scan this QR

code or visit http://tinyurl.com/jyoysqo.

Set Up Your Arlo Go Camera

¾ To create a new Arlo account:

1. Launch the Arlo app from your smartphone, tap New to Arlo?

and select Arlo Go.

If you are using a computer, visit arlo.netgear.com.

Note: If you see a message indicating that

your mobile connection is not active,

you might need to edit the APN.

For information about viewing and

editing APNs, refer to the Arlo Go

user manual.

2. Follow the onscreen instructions.

¾ To add an Arlo Go camera to an existing Arlo account:

1. If you already set up an Arlo account, log in, and click or tap Add

Device.

2. Follow the onscreen instructions.

1110

You can place your camera on a ﬂat surface or mount it.

Place Your Camera

¾ To mount the camera on a wall:

1. Place the wall plate and secure it with three screws.

2. Attach the camera to the wall plate.

If you’re mounting the camera to drywall, be sure to use the

included plastic drywall anchors.

1312

The Arlo Go battery is partially charged when it leaves the factory.

¾ To recharge the battery:

1. Connect the power adapter to the camera.

Caution: You must use an Arlo Go power adapter to charge the

battery. Do not try to power the camera or charge the battery

with any power adapter other than the one provided with the

Arlo Go camera.

2. Plug the power adapter into an electrical outlet.

The camera LED lights solid blue for two seconds when the camera

battery is fully charged.

Charge Your Arlo Go Battery

The Arlo Go camera is designed to connect to a mobile network.

Connecting to the camera through the cloud requires that you are using

a compatible device and that your Internet connection is active. Coverage

and service are not available everywhere.

During setup, the Arlo app uses the mobile network to ﬁnd your Arlo Go

camera so that you can add the camera to your Arlo account.

After setup, the Arlo Go camera uses the mobile network to send

recordings to the cloud storage associated with your Arlo account.

Arlo Go Access and Cloud Storage

1514

Congratulations! Your Arlo Go camera is set up and ready to go.

To view useful tutorial videos, ﬁnd troubleshooting tips, or get support,

visit support.arlo.com.

You’re Done!

Solid amber

No SIM card is inserted

or the SIM card is

damaged.

Fast blinking amber

The camera connected

to the cellular network

but it cannot connect

to the cloud.

For more information,

visit http://tinyurl.com/

h8csb5a or scan this

QR code:

Very slow blinking

blue

The camera is powering

on.

Slow blinking blue

The camera is ready to

scan the QR code.

Fast blinking blue

The camera is

connected to the cloud.

Slow blinking amber

Mobile network

coverage is not

available.

Blinking amber and

purple

The SD card type is

invalid.

Camera LED Guide

Blinking blue and

purple

The camera is

connecting to the

network and the cloud.

Blinking amber and

blue

The camera is receiving

a ﬁrmware upgrade.

Inc.

Compliance

For the current EU Declaration of Conformity, visit

http://kb.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

NETGEAR INTL LTD

Building 3, University Technology Center

Curraheen Road, Cork, Ireland

350 East Plumeria Drive

San Jose, CA 95134 USA

April 2017

Netgear Arlo Go Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear Arlo Go

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info