670573
155
Zoom out
Zoom in
Vorherige Seite
1/198
Nächste Seite
Manage the Advanced WiFi Network Settings
155
AC1600 WiFi Cable Modem Router
Control the WiFi Radios
The modem router provides internal WiFi radios that broadcast signals in the 2.4 GHz and
5
GHz ranges. By default, they are on so that you can connect over WiFi to the modem
router. When the WiFi radios are off, you can still use an Ethernet cable for a LAN connection
to the modem router.
You can turn the WiFi radios on and off with the WiFi On/Off button on the modem router, or
you can log in to the modem router and enable or disable the WiFi radios through the web
management interface. If you are close to the modem router, it might be easier to press the
WiFi On/Off button. If you are away from the modem router or already logged in, it might be
easier to enable or disable the radios through the web management interface. You can also
turn the WiFi radios off and on based on a schedule. (See
Set Up a WiFi Schedule on
page 156.)
Tip: If you want to disable the WiFi radios of the modem router, use a wired
connection to avoid being disconnected when the WiFi radios turn off.
Use the WiFi On/Off Button
To turn the WiFi radios off and on with the WiFi On/Off button:
Press the WiFi On/Off button on the right side panel of the modem router for three
seconds.
If you turned off the WiFi radios, the 2.4 GHz WiFi LED and 5 GHz WiFi LED turn off. If
you turned on the WiFi radios, these WiFi LEDs lights solid green.
Enable or Disable the WiFi Radios
If you used the WiFi On/Off button to turn off the WiFi radios, you cannot log in to the modem
router over a WiFi connection to turn them back on. You must press the WiFi On/Off button
again for three seconds to turn the WiFi radios back on.
To enable or disable the WiFi radios:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Wireless Settings.
155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Netgear C6250 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Netgear C6250

Netgear C6250 Kurzanleitung - Englisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info