670575
104
Zoom out
Zoom in
Vorherige Seite
1/110
Nächste Seite
Troubleshooting
104
Nighthawk AC1900 WiFi Cable Modem Router
Changes Not Saved
If the modem router does not save the changes you make in the modem router interface,
check the following:
When entering configuration settings, always click the Apply button before moving to
another screen or tab, or your changes are lost.
Click the Refresh or Reload button in the web browser. The changes might have
occurred, but the old settings might be in the web browser’s cache.
Wireless Connectivity
If you are having trouble connecting wirelessly to the modem router, try to isolate the
problem:
The computer or WiFi device that you are using does not find the WiFi network.
This can happen for the following reasons:
- Someone pressed the WiFi On/Off button on the modem router, which turned off the
wireless radios.
Check the 2.4 GHz and 5 GHz LEDs on the front of the modem router. If they are off,
press the WiFi On/Off button to turn the wireless radios back on.
- Someone logged in to the modem router and disabled its wireless radios or set up a
wireless schedule.
In this case, pressing the WiFi On/Off button does not turn the wireless radios back
on. You must log in to enable the wireless radios. Use an Ethernet cable to for a wired
connection to the modem router. Then log in and change the settings. For more
information, see
Control the Wireless Radios on page 70.
- Someone logged in to the modem router and disabled its SSID broadcast. Your
wireless network is hidden and does not display in your wireless client’s scanning list.
(By default, SSID broadcast is enabled.)
To connect with WiFi, you must type the network SSID and password. For information
about how to enable the SSID broadcast, see
Specify Basic WiFi Settings on
page 66.
You can find the WiFi network, but you can’t connect. Check the following:
- Make sure that your computer or WiFi device supports the security that you are using
for your wireless network (WPA or WPA2)?
- You are not sure what the WiFi password is.
The preset WiFi password is on the product label. If you changed it and do not
remember the new password, you can use a wired Ethernet connection to log in to the
modem router and view or change the WiFi password. For more information, see
Change the WiFi Security Option on page 68
104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Netgear C7000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Netgear C7000

Netgear C7000 Kurzanleitung - Englisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info