Bedienungsanleitung Netgear D6200 (Seite 146 von 162) (Englisch)

519533

146

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

Troubleshooting

146

D6200 WiFi DSL Modem Router

Cannot Log In to the Router

If you are unable to log in to the WiFi DSL modem router from a computer on your local

network, check the following:

• If you are using an Ethernet-connected computer, check the Ethernet connection

between the computer and the WiFi DSL modem router. For more information, see

Check

Ethernet Cable Connections on page 143.

• Make sure that your computer’s IP address is on the same subnet as the WiFi DSL

modem router. If you are using the recommended addressing scheme, your computer’s

address should be in the range of 192.168.0.2 to 192.168.0.254.

• If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and

Mac OS generate and assign an IP address if the computer cannot reach a DHCP server.

These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in

this range, check the connection from the computer to the WiFi DSL modem router, and

reboot your computer.

• If your WiFi DSL modem router’s IP address was changed and you do not know the

current IP address, clear the WiFi DSL modem router’s configuration to factory defaults.

This procedure sets the WiFi DSL modem router’s IP address to 192.168.0.1. This

procedure is explained in

Factory Settings on page 153.

• Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using

Internet Explorer, click Refresh to be sure that the Java applet is loaded.

• Try quitting the browser and launching it again.

• Make sure that you are using the correct login information. The factory default login name

is admin and the password is password. Make sure that Caps Lock is off when you enter

this information.

• If you are attempting to set up your NETGEAR WiFi DSL modem router as an additional

router behind an existing router in your network, consider replacing the existing router

instead. NETGEAR does not support such a configuration.

• If you are attempting to set up your NETGEAR WiFi DSL modem router as a replacement

for an ADSL gateway in your network, the WiFi DSL modem router cannot perform many

gateway services, for example, converting ADSL or cable data into Ethernet networking

information. NETGEAR does not support such a configuration.

Cannot Access the Internet

If you can access your router but you are unable to access the Internet, first determine

whether the WiFi DSL modem router can obtain an IP address from your Internet service

provider (ISP). Unless your ISP provides a fixed IP address, your WiFi DSL modem router

requests an IP address from the ISP. You can determine whether the request was successful

using the Router Status screen.

 To check the WAN IP address:

1. Start your browser and select an external site such as http://www.netgear.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear D6200 Seite 146

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear D6200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info