Bedienungsanleitung Netgear DGN2200Bv4 (Seite 29 von 133) (Englisch)

519656

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

NETGEAR genie Basic Settings

N300 Wireless ADSL2+ Modem Router DGN2200v4

Wireless Settings Screen Fields

You can use this screen to view or change the wireless network settings and the security

option.

Wireless Network

Enable SSID Broadcast. This setting allows the modem router to broadcast its SSID so

wireless stations can see this wireless name (SSID) in their scanned network lists. This

check box is selected by default. To turn off the SSID broadcast, clear this check box, and

click Apply.

Enable Wireless Isolation. If this check box is selected, computers or wireless devices that

join the network can use the Internet, but cannot access each other or access Ethernet

devices on the network.

Name (SSID). The SSID is also known as the wireless network name. Enter a 32-character

(maximum) name in this field. This field is case-sensitive. The default SSID is randomly

generated, and NETGEAR strongly recommends that you do not change this setting.

Region. The location where the modem router is used. Select from the countries in the list. In

the United States, the region is fixed to United States and is not changeable.

Channel. This setting is the wireless channel the gateway uses. Enter a value from 1 through

13. (For products in the North America market, only Channels 1 through 11 can be operated.)

Do not change the channel unless you experience interference (shown by lost connections or

slow data transfers). If this happens, experiment with different channels to see which is the

best.

When you use multiple access points, it is better if adjacent access points use different radio

frequency channels to reduce interference. The recommended channel spacing between

adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6 and 11).

Mode. Up to 145 Mbps is the default setting, which allows 802.11n and 802.11g wireless

devices to join the network. The other settings are Up to 54 Mbps, and Up to 300 Mbps.

Security Options Settings

The Security Options section of the Wireless Settings screen lets you change the security

option and passphrase. NETGEAR recommends that you do not change these settings,

but this section explains how. Do not disable security.

Wireless Security Options

A security option is the type of security protocol applied to your wireless network. The

security protocol in force encrypts data transmissions and ensures that only trusted devices

receive authorization to connect to your network. Wi-Fi Protected Access (WPA) has several

options including pre-shared key (PSK) encryption.

This section presents an overview of the security options and provides guidance on when to

use which option. It is also possible to set up a guest network without wireless security.

NETGEAR does not recommend this.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear DGN2200Bv4 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear DGN2200Bv4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info