Bedienungsanleitung Netgear EX6200 - AC1200 (Seite 59 von 119) (Englisch)

607713

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Manage the Extender Network and Security Settings

AC1200 WiFi Range Extender

Note: If you clear a Keep Existing Wireless Settings check box and use

WPS to add a computer or WiFi device to the extender’s network, the

SSID and passphrase are automatically generated and other devices

that are already connected to the extender’s network might be

disconnected. You can view the SSID and passphrase on the Wireless

Settings screen (see Manage the Extender WiFi Settings on page 48).

NETGEAR recommends that you keep the Keep Existing Wireless

Settings check boxes selected.

6. Click the Apply button.

Your changes are saved.

Manage a WiFi Access List

By default, any WiFi device that is configured with the correct network name (SSID) can

access the WiFi network of the extender. For increased security, you can restrict access to

the WiFi network of the extender to allow only specific WiFi devices based on their MAC

addresses. Devices that are not on the access list cannot join the WiFi network of the

extender.

Enable Device’s PIN By default, the Enable Device's PIN check box is selected and the extender’s PIN

is enabled. For enhanced security, you can disable the extender’s PIN by clearing

the Enable Device's PIN check box. However, when you disable the extender’s

PIN, WPS is not disabled because you can still use the physical WPS button.

Note: The PIN function might temporarily be disabled when the router detects

suspicious attempts to break into the router’s WiFi settings by using the router’s

PIN through WPS.

Prevent PIN

compromise

By default, automatic disabling of the PIN is turned on, and the PIN is disabled

after three failed PIN connections. In this situation, the WPS LED blinks slowly.

When you restart the extender, the PIN is reenabled.

To turn off automatic disabling of the PIN, clear the check box below the Enable

Device’s PIN check box. You can change this setting only when the PIN is

enabled.

To change the number of times that a PIN connection is allowed to fail, enter a

number in the field. You can change this number only when the PIN is enabled.

Keep Existing Wireless

Settings (2.4GHz b/g/n)

By default, the settings on the Wireless Settings screen remain the same when

you use WPS to establish a WiFi connection in the 2.4 GHz band. Clear the Keep

Existing W

ireless Settings (2.4GHz b/g/n) check box only if you want to allow

the WPS process to change the SSID and passphrase for access in the 2.4 GHz

band on the Wireless Settings screen.

Keep Existing Wireless

Settings (5GHz a/n/ac)

By default, the settings on the Wireless Settings screen remain the same when

you use WPS to establish a WiFi connection in the 5 GHz band. Clear the

Keep

Existing W

ireless Settings (5GHz a/n/ac) check box only if you want to allow the

WPS process to change the SSID and passphrase for access in the 5

GHz band

on the Wireless Settings screen.

Setting Description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear EX6200 - AC1200 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear EX6200 - AC1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info