Bedienungsanleitung Netgear EX6200 - AC1200 (Seite 1 von 2) (Englisch)

607713

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Getting Started

EX6200 WiFi Range Extender

AC1200 High Power Dual Band Gigabit Ports

Installation Guide

3. Connect to your WiFi router.

Press the WPS button on the extender. The Link Rate LEDs and Device to

Extender LED blink green. Within two minutes, press the WPS button on your

WiFi router. After a few seconds, the 2.4 GHZ Link Rate LED lights green,

indicating a good connection between your WiFi router and your extender.

If the 2.4 GHz Link Rate LED does not light, or the LED is blinking amber, try

again. If the LED still do not light, follow the instructions for No WPS button on

the right.

4. Add a WiFi band.

If your WiFi router supports the 5 GHz band (not all routers do), and you want to

extend that band, repeat Step 2 and check that the 5 GHz Link Rate LED lights

green to confirm the connection.

6. Connect your WiFi devices.

Take your WiFi device to the location with poor WiFi router coverage. Find the

new extender network name:

Existing network name: MyNetworkName

New extended network name: MyNetworkName_2GEXT

MyNetworkName_5GEXT

Select the new network and use your WiFi router password to connect. You

are now using your extended WiFi network.

5. Choose a location and check the signal strength.

Now that the extender is connected to your WiFi router, you can move it to a

location that will boost your WiFi range. The location you choose must be

within the range of your existing WiFi router network. Plug the extender into

an electrical outlet.

The Link Rate LEDs help you choose a spot where the extender-to-router

connection is optimal. See the Indicator LEDs section on the back to learn how

the LEDs show the best connection. If you get no connection or a poor

connection, move the extender closer to your WiFi router and try again until

the 2.4 GHz or 5 GHz Link Rate LED lights green.

Yes

No (or not sure)

3. Connect to the extender.

On a computer, tablet, or smartphone, open the WiFi connection manager and

connect to the extender network called NETGEAR_EXT. When you are

connected to the extender, the Device to Extender LED lights solid green.

4. Set up with NETGEAR genie.

Open a web browser. You are automatically taken to NETGEAR genie®, which

guides you through the following steps.

Note: If you are not automatically directed to NETGEAR genie, go to

www.mywifiext.net. If a login screen displays, enter admin for the user name

and password for the password.

a. Select your existing WiFi router’s network.

b. Enter your password for your WiFi router’s network.

c. Choose a name for the extender WiFi network.

You can accept the default network name (MyNetworkName_EXT) or

rename the network.

6. Connect your WiFi devices.

Take your WiFi device to the location with poor WiFi router coverage. Find the

new extender network name:

Existing network name: MyNetworkName

New extended network name: MyNetworkName_2GEXT

MyNetworkName_5GEXT

Select the new network and use your WiFi router password to connect. You

are now using your extended WiFi network.

Does your WiFi router have a WPS button?

2. Turn on your extender.

Place the extender close to your WiFi router. Plug the extender into an

electrical outlet. Press the Power button if necessary.

Wi-Fi Protected Setup (WPS) is an easy way to connect WiFi devices. The button might look like one of these:

5. Choose a location and check the signal strength.

Now that the extender is connected to your WiFi router, you can move it to a

location that will boost your WiFi range. The location you choose must be

within the range of your existing WiFi router network. Plug the extender into

an electrical outlet.

The Link Rate LEDs help you choose a spot where the extender-to-router

connection is optimal. See the Indicator LEDs section on the back to learn how

the LEDs show the best connection. If you get no connection or a poor

connection, move the extender closer to your WiFi router and try again until

the 2.4 GHz or 5 GHz Link Rate LED lights green.

2. Turn on your extender.

Place the extender close to your WiFi router. Plug the extender into an

electrical outlet. Press the Power button if necessary.

1. Attach the antennas.

Attach the antennas to the antenna connector by turning the antennas

clockwise. Bend and rotate the antennas into position. Double check that the

antennas are properly tightened.

1. Attach the antennas.

Attach the antennas to the antenna connector by turning the antennas

clockwise. Bend and rotate the antennas into position. Double check that the

antennas are properly tightened.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear EX6200 - AC1200 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear EX6200 - AC1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info