Bedienungsanleitung Netgear GC110 (Seite 318 von 416) (Englisch)

710805

318

Zoom out

Zoom in

Vorherige Seite

1/416

Nächste Seite

Manage Device Security

318

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports

• Action. Select the ACL forwarding action by selecting one of the following radio

buttons:

- Permit. Forward packets that meet the ACL criteria.

- Deny. Drop packets that meet the ACL criteria.

• Egress Queue. If you select the Permit radio button, select the hardware egress

queue identifier that is used to handle all packets matching this IPv6 ACL rule. The

range of queue IDs is 0 to 7.

• Logging. If you select the Deny radio button, you can enable logging for the ACL by

selecting the Enable radio button. (Logging is subject to resource availability in the

device.)

If the access list trap flag is also enabled, periodic traps are generated, indicating the

number of times this rule was evoked during the report interval. A fixed five-minute

report interval is used for the switch. A trap is not issued if the ACL rule hit count is

zero for the current interval.

• Interface. For a Permit action, use either a mirror interface or a redirect interface:

- Select the Mirror Interface radio button and use the menu to specify the egress

interface to which the matching traffic stream is copied, in addition to being

forwarded normally by the device.

- Select the Redirect Interface radio button and use the menu to specify the

egress interface to which the matching traffic stream is forced, bypassing any

forwarding decision normally performed by the device.

• Match Every. Select whether all packet must match the selected IPv6 ACL rule:

- Disable. Not all packets need to match the selected IPv6 ACL rule. You can

configure other match criteria on the page.

- Enable. All packets must match the selected IPv6 ACL rule and are either

permitted or denied. In this case, you cannot configure other match criteria on the

page.

• Protocol Type. Specify the IPv6 protocol type in one of the following ways:

- From the Protocol Type menu, select IPv6, ICMPv6, TCP, or UDP.

- From the Protocol Type menu, select Other, and in the associated field, specify

an integer ranging from 0 to 255. This number represents the IPv6 protocol.

• Src. In the Src field, enter a source IPv6 address or source IPv6 address range to be

compared to a packet’s source IPv6 address as a match criterion for the selected

IPv6 ACL rule:

- If you select the IPv6 Address radio button, enter an IPv6 address or IPv6 range

to apply this criteria. If this field is left empty, it means any.

- If you select the Host radio button, enter a host source IPv6 address to match the

specified IPv6 address. If this field is left empty, it means any.

The source IPv6 address argument must be in the form documented in RFC 2373

where the address is specified in hexadecimal numbers using 16-bit values between

colons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear GC110 Seite 318

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info