Bedienungsanleitung Netgear GS110EMX (Seite 16 von 67) (Englisch)

670514

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

You can copy and paste the IP address into a new shortcut or bookmark it for quick access

on your computer or mobile device. However, if you restart the switch, a dynamic IP

address (assigned by a DHCP server) might change and the bookmark might no longer

link to the login page for the switch. In that situation, you must repeat this procedure so

that you can discover the new IP address of the switch in the network and update your

bookmark accordingly.You can also set up a fixed (static) IP address for the switch (see

Set Up a Fixed IP Address for the Switch on page 16) to make sure that the new bookmark

always links to the login page for the switch, even after you restart the switch.

Tip

Set Up a Fixed IP Address for the Switch

By default, the switch receives an IP address from a DHCP server (or a router that functions as a DHCP

server) in your network. However, the DHCP server might not always issue the same IP address to the

switch. For easy access to the switch local browser interface, you can set up a fixed (static) IP address on

the switch.This allows you to manage the switch anytime from a mobile device because the switch IP

address remains the same.

To change the IP address of the switch, you can connect to the switch by one of the following methods:

• Through a network connection. If the switch and your computer are connected to the same network

(which is the most likely situation), you can change the IP address of the switch through a network

connection (see Set Up a Fixed IP Address for the Switch Through a Network Connection on page 16).

• Through a direct connection. In the unlikely situation that the switch is not connected to a network,

or for some reason you cannot connect to the switch over a network connection, you can change the

IP address of the switch by using an Ethernet cable and making a direct connection to the switch (see

Set Up a Fixed IP Address for the Switch by Connecting Directly to the Switch Off-Network on page

17).

Set Up a Fixed IP Address for the Switch Through a Network Connection

If the switch and your computer are connected to the same network (which is the most the likely situation),

you can change the IP address of the switch through a network connection.

To disable the DHCP client of the switch and change the IP address of the switch to a fixed

IP address by using a network connection:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

4. Enter the switch password.

The default password is password. The password is case-sensitive.

The Switch Information page displays.

5. From the DHCP Mode menu, select Disable.

The IP address fields become available.

Install and Access the Switch in Your Network

8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear GS110EMX Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear GS110EMX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info