Bedienungsanleitung Netgear GS728TP (Seite 2 von 2) (Englisch)

710800

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

December 2012

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to

change without notice. Other brand and product names are registered trademarks or trademarks of their

For the complete EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

Intended for indoor use only in all EU member states, EFTA states, and Switzerland.

The Smart Control Center Utility finds the switch and displays its MAC address,

IP address, and model number. If you cannot configure your switch, verify that

the cable connections are secure and that the IP address configuration of the

computer is in the same subnet as the switch, and click the Discover button.

3. Click to select the line displaying the details of your switch. If there are multiple

switches in your network, be sure to select the one you want to configure.

4. Click Web Browser Access to view the switch Login screen.

5. Enter the default password of password in lower case letters and click Login.

The switch displays the switch main settings page. Configure the switch for

your network. Consult the reference manual on the resource CD or the online

help in the switch for assistance with configuration procedures.

After you log in to the switch, the main System Information screen displays.

Use the configuration menu options to configure your switch.

Troubleshooting Tips

Here are some tips for correcting simple problems you might have.

• Be sure to power on your computer and switch in the correct sequence:

First, turn off the switch and computer. Next, turn on the switch and wait 2

minutes. Last, turn on the computer.

• Make sure the Ethernet cables are plugged in.

For each powered-on computer connected to the switch, the corresponding

switch LAN port status LED is lit.

• Make sure the network settings of the computer are correct.

In most cases, computers should be configured to obtain an IP address through

DHCP.

If your network uses static IP addresses, be sure that the switch and computer

are configured with valid IP addresses. For help with this, see the software

administration manual.

Technical Support

After installing your device, locate the serial number on the label of your product and

use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

For additional information about setting up, configuring, and using your smart

switch, see the software administration manual. You can get the manual online at

http://downloadcenter.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

WARNING!!

Do not stack equipment, or place equipment in tight spaces, in drawers, or on

carpets. Make sure that your equipment has at least 2 inches (5 cm) of air

space on all sides.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear GS728TP Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info