493238
28
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
HDX111 Powerline HD Plus Ethernet Adapter User Manual
2-10 HDX111 Configuration Utility
v1.1, March 2008
7. Select the Main tab and click Scan. Check that the utility detects all the Powerline HD Plus
Ethernet Adapters in your Powerline network and that your network ID is displayed.
Specifying the Network ID for a New Powerline HD Ethernet
Adapter
To add a new Powerline HD Ethernet Adapter to an existing Powerline network, it must use the
same network ID as the other Powerline devices. How you specify the network ID depends on
whether or not the Powerline HD Ethernet Adapter is connected locally (via Ethernet) to the PC
that is running the HDX111 configuration utility.
To specify the network ID for a locally connected Powerline HD Ethernet Adapter, follow the
instructions in
“Specifying Your Powerline Network ID” on page 2-9.
To specify the network ID for a remote Powerline HD Ethernet Adapter, follow the
instructions in the following section
“Adding a New Device from a Remotely Connected
Computer.”
Adding a New Device from a Remotely Connected Computer
Follow these steps:
1. Plug the new device into an AC power outlet.
2. Start the HDX111 Configuration Utility and wait for the utility to detect the Powerline HD
Ethernet adapters in your Powerline network. Check that all the Powerline HD Ethernet
adapters in the established network are displayed in the Main tab.
3. Select the Security tab and select each device.
4. Click Use Default. The Network ID field changes to the default setting, PowerlineHD.
5. Click Set All Devices.
6. Select the Main tab, and then click Scan. Wait for the new Powerline HD Ethernet adapter to
be listed. The new device can be identified by its MAC address.
7. If you want to change the device name, select the device, click Rename, and type a new name.
8. Select the Security tab.
9. Re-enter your network ID in the Network ID field.
10. Click Set All Devices. The utility displays a message indicating that the operation was
successful.
11. Select the Main tab and click Scan. Check that all devices are detected with your network ID.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Netgear HDX111 Powerline HD Plus Ethernet Adapter wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info