Bedienungsanleitung Netgear JR6150 (Seite 121 von 159) (Englisch)

670474

121

Zoom out

Zoom in

Vorherige Seite

1/159

Nächste Seite

Advanced Settings

121

A750 Wireless Dual Band Gigabit Router JR6150

Note: Only one computer at a time can use the triggered application.

Port Forwarding to Permit External Host Communications

In both of the preceding examples, your computer initiates an application session with a

server computer on the Internet. However, you might need to allow a client computer on the

Internet to initiate a connection to a server computer on your network. Normally, your router

ignores any inbound traffic that is not a response to your own outbound traffic. You can

configure exceptions to this default rule by using the port forwarding feature.

A typical application of port forwarding can be shown by reversing the client-server

relationship from the previous web server example. In this case, a remote computer

’

browser must access a web server running on a computer in your local network. Using port

forwarding, you can tell the router, “When you receive incoming traffic on port 80 (the

standard port number for a web server process), forward it to the local computer at

192.168.1.123.” The following sequence shows the effects of the port forwarding rule you

have defined:

1. The

user of a remote computer opens a browser and requests a web page from

www

.example.com, which resolves to the public IP address of your router. The remote

computer composes a web page request message with the following destination

information:

• Destination address.

The IP address of www

.example.com, which is the address of

your router.

• Destination port number. 80, which is the standard port number for a web server

process.

The remote computer then sends this request message through the Internet to your

router.

2. Your router receives

the request message and looks in its rules table for any rules covering

the disposition of incoming port 80 traffic. Your port forwarding rule specifies that incoming

port 80 traffic should be forwarded to local IP address 192.168.1.123. Therefore, your router

modifies the destination information in the request message.

The destination address is replaced with 192.168.1.123.

Your router then sends this request message to your local network.

3. Your web server at 192.168.1.123 receives the request and composes a return message

with

the requested web page data. Your web server then sends this reply message to your

router.

4. Your router performs

Network Address Translation (NAT) on the source IP address and

sends this request message through the Internet to the remote computer, which displays the

web page from www.example.com.

To configure port forwarding, you must know which inbound ports the

application needs. You

can usually find this information by contacting the publisher of the application or the relevant

user groups and newsgroups.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear JR6150 Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear JR6150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info