Bedienungsanleitung Netgear JWNR2000v2 (Seite 26 von 108) (Englisch)

670508

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

26 | Chapter 2. Router Internet Setup

NETGEAR N300 Wireless Router JWNR2000v2 User Manual

Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP

address that your ISP assigned. The gateway is the ISP’s router to which your router will

connect.

• When a login is not required, this field displays:

Use IP Over ATM (IPoA). Your ISP uses classical IP addresses (RFC 1577). Enter the IP

address, IP subnet mask, and gateway IP addresses that your ISP assigned.

Domain Name Server (DNS) Address. The DNS server is used to look up site addresses

based on their names.

Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP

automatically assigns this address.

Use These DNS Servers. If you know that your ISP does not automatically transmit DNS

addresses to the router during login, select this option, and enter the IP address of your

ISP’s primary DNS server. If a secondary DNS server address is available, enter it also.

NAT (Network Address Translation). NAT automatically assigns private IP addresses

(10.1.1.x) to LAN-connected devices.

Enable. Usually NAT is enabled.

Disable. This disables NAT, but leaves the firewall active. Disable NAT only if you are

sure you do not need it. When NAT is disabled, only standard routing is performed by this

router. Classical routing lets you directly manage the IP addresses that the router uses.

Classical routing should be selected only by experienced users.

Disable firewall. This disables the firewall in addition to disabling NAT. With the firewall

disabled, the protections usually provided to your network are disabled.

When no login is required, this field displays:

Router MAC Address. The Ethernet MAC address used by the router on the Internet port.

Some ISPs register the MAC address of the network interface card in your computer when

your account is first opened. They will then accept traffic only from the MAC address of that

computer. This feature allows your router to use your computer’s MAC address (this is also

called cloning).

Use Default Address. Use the default MAC address.

Use Computer MAC Address. The router captures and uses the MAC address of the

computer that you are now using. This has to be the computer that is allowed by the ISP.

Use This MAC Address. Enter the MAC address that you want to use.

Unsuccessful Internet Connection

1. Review your settings to be sure you have selected the correct options and typed

everything correctly.

1. Disabling NAT reboots the router and resets its settings to the factory defaults. Disable NAT only if you plan to set

up the router in a setting where you will be manually administering the IP address space on the LAN side of the router.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear JWNR2000v2 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear JWNR2000v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info