519380
9
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
Configuring Your ME101
If the default settings dont work in your wireless network, you need to configure the bridge.
Identifying the Wireless Network Name (SSID), IP Address,
and WEP Security Settings
You may want to print this page separately, fill in the configuration parameters, and put it in a
safe place for possible future reference. For an existing wireless network, the person who set up
the network will be able to provide this information.
Note: For the access point or router and the bridge to communicate with each other, both must
be configured with the same SSID, WEP security settings, and the same IP subset address.
Wireless Network Name (SSID): The Service Set Identification (SSID) identifies the
wireless local area network. Any is the default ME101 SSID. If you have named your
wireless network with a different SSID, write your networks SSID on the line below.
Wireless network name (SSID): ______________________________
Bridge IP Address: Your Ethernet network has an IP subset address given as a set of three
numbers (xxx.xxx.xxx.yyy) plus a last set of numbers to identify each device on the
network. The default IP address for the bridge is 192.168.0.200. To communicate to your
Ethernet network, the bridge must have a unique address consistent with your networks IP
address. If you need to change the bridges IP address, write down the new address.
Bridges IP address: ______________________________
WEP Security Encryption key: The default WEP encryption mode of the bridge is
disabled. If you have set up WEP security on your wireless network (through the router or
access point), youll need to configure the bridge using the same WEP security parameters.
WEP Encryption Key Size, circle one: 40/64 or 128 bits
WEP Encryption Passphrase, if used in the router or access point: ___________________
A passphrase is used to automatically generate the WEP hexadecimal numbers for the key.
Otherwise, you will have to manually enter up to four hexadecimal numbers.
WEP Hexadecimal Numbers: ______________________________
______________________________
______________________________
______________________________
3
3
7
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Netgear ME 101 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info