Bedienungsanleitung Netgear MR314 (Seite 99 von 114) (Englisch)

479755

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

Reference Guide for the Model MR314 Cable/DSL Wireless Router

Network and Routing Basics B-9

This scheme offers the additional benefit of simple firewall-like protection because the internal

LAN addresses are not available to the Internet through the translated connection. All incoming

inquiries are filtered out by the router. This filtering can prevent intruders from probing your

system. However, using port forwarding, you can allow one PC (for example, a Web server) on

your local network to be accessible to outside users.

MAC Addresses and Address Resolution Protocol

An IP address alone cannot be used to deliver data from one LAN device to another. To send data

between LAN devices, you must convert the IP address of the destination device to its media

access control (MAC) address. Each device on an Ethernet network has a unique MAC address,

which is a 48-bit number assigned to each device by the manufacturer. The technique that

associates the IP address with a MAC address is known as address resolution. Internet Protocol

uses the Address Resolution Protocol (ARP) to resolve MAC addresses.

If a device sends data to another station on the network and the destination MAC address is not yet

recorded, ARP is used. An ARP request is broadcast onto the network. All stations on the network

receive and read the request. The destination IP address for the chosen station is included as part of

the message so that only the station with this IP address responds to the ARP request. All other

stations discard the request.

The station with the correct IP address responds with its own MAC address directly to the sending

device. The receiving station provides the transmitting station with the required destination MAC

address. The IP address data and MAC address data for each station are held in an ARP table. The

next time data is sent, the address can be obtained from the address information in the table.

Domain Name Server

Many of the resources on the Internet can be addressed by simple descriptive names such as

www.NETGEAR.com. This addressing is very helpful at the application level, but the descriptive

name must be translated to an IP address in order for a user to actually contact the resource. Just as

a telephone directory maps names to phone numbers, or as an ARP table maps IP addresses to

MAC addresses, a domain name system (DNS) server maps descriptive names of network

resources to IP addresses.

When a PC accesses a resource by its descriptive name, it first contacts a DNS server to obtain the

IP address of the resource. The PC sends the desired message using the IP address. Many large

organizations, such as ISPs, maintain their own DNS servers and allow their customers to use the

servers to look up addresses.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear MR314 Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info