Bedienungsanleitung Netgear Nighthawk EX7500 (Seite 45 von 50) (Englisch)

710715

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Cannot Connect to the Extender

If you cannot connect to the extender, determine what prevents you from connecting:

• If you cannot access www.mywifiext.net, see Cannot Access mywifiext.net on page 45 for more

information.

• If you forgot your user name or password, click the Username & Password Help link. For more

information, see FAQs on page 44.

• If your browser displays an error page, include http:// in the address field of your browser by typing

http://www.mywifiext.net.

• If you already set up the extender but can no longer connect to it over WiFi, check to see if the Client

Link LED is off.

Cannot Join a WiFi Network and Receive an Error Message

To join a WiFi network, you must know its network name (also called the SSID) so that you can select it. If

the network is secure, you must know the passphrase or key. If the extender does not connect to the network

that you select, the cause might be one of the following:

• It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart Setup (see

Run Smart Setup Installation on page 15) to select a WiFi network and retype the passphrase or key.

The passphrase or key is case-sensitive. For example, PASSWORD25 is not the same as Password25

or password25.

• If the extender cannot detect your WiFi network, check to see if your WiFi network is still working. Make

sure that the WiFi router is turned on. If possible, move the extender closer to the WiFi router.

• If the extender Router Link LED is red, the WiFi connection between the WiFi router and the extender

is poor.You can establish the best connection with a clear line of sight between the extender and the

WiFi router. Make sure that no physical obstacles exist between the extender and the WiFi router, and

try to move the extender closer to the WiFi router.

If you use Smart Setup, and the extender does not connect to the WiFi router, does not connect to the

Internet, or cannot get an IP address from the WiFi router, Smart Setup displays a message to notify you

that the extender is not configured.

To run Smart Setup again, click the YES button.To manually configure the extender, click the NO,

CONFIGURE MANUALLY button.

Cannot Access mywifiext.net

When you try to access www.mywifiext.net to set up your extender, you might receive an error message

that says you are not connected to the extender's WiFi network.This website is not a regular Internet website.

It is a local web address used to log in to the extender web browser interface and view the extender’s

settings.

Your computer or mobile device must be connected to your extender network to access www.mywifiext.net.

Try these troubleshooting tips to connect to www.mywifiext.net:

FAQs and Troubleshooting

Nighthawk X4S AC2200 Tri-Band WiFi Range Extender

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear Nighthawk EX7500 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info