Bedienungsanleitung Netgear Orbi (Seite 1 von 2) (Englisch)

670519

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Quick Start Guide

Blue

The connection between the

satellite and router is good.

Amber

The connection between the router

and satellite is fair. Consider moving

the satellite closer to the router.

Magenta

The satellite was unable to connect

to the router. Move the satellite

closer to the router.

Note: If the ring LED still lights

magenta aer about one minute,

press the Sync button on the router

and on the satellite. If the satellite

successfully syncs with the router,

the satellite’s ring LED lights white.

Then, the ring LED lights blue to

indicate a good connection, and

then turns o.

Aer the satellite is powered on, the

satellite’s ring LED lights white while the

satellite attempts to sync with the router.

Then, the ring LED lights one of the

following colors for about three minutes, and

then turns o:

Satellite Sync LED Colors

NETGEAR INTL LTD

Building 3, University Technology Centre

Curraheen Road, Cork, Ireland

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only.

March 2017

Set Up Your Orbi Router

and Wall Plug Satellite

Set up your router and satellite using one of

the following options:

• NETGEAR Orbi app. Follow these steps:

a. Scan a QR code or search for

NETGEAR Orbi in the Apple App

Store or Google Play Store.

b. Download and launch the NETGEAR

Orbi app on your mobile device and

follow the prompts.

• Web browser. Follow these steps:

a. Unplug your modem and remove

and reinsert the backup battery if it

uses one.

b. Plug the modem back in.

c. Use the included Ethernet cable to

connect your modem to the yellow

Internet port on your router.

Note: If you want to connect your

router to an existing gateway, we

recommend that you turn o your

existing gateway’s WiFi.

d. Plug in your router.

The Power LED on the back of the

router lights green. If the Power

LED does not light, press the

Power On/O button.

e. Wait for the router’s ring LED to

light white.

f. Place your satellite, plug it in, and

wait for the satellite’s ring LED to

light blue or amber.

If the satellite’s ring LED lights

magenta, move the satellite closer

to the router.

For more information, see the

Satellite Sync LED Colors section.

g. Connect your computer or mobile

device to the router or satellite with

an Ethernet or WiFi connection:

• Ethernet. Use an Ethernet cable

to connect your computer to

the router.

• WiFi. Use the preset WiFi

network name (SSID) and

password on the label of the

router or satellite to connect to

the Orbi WiFi network.

h. Launch a web browser, visit

orbilogin.com, and follow the

prompts.

If a login window opens, enter the

user name and password. The user

name is admin and the default

password is password.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear Orbi Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear Orbi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info