Bedienungsanleitung Netgear R8500 - Nighthawk X8 (Seite 175 von 184) (Englisch)

670483

175

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

2.4 GHz, 5 GHz-1, and 5 GHz-2 WiFi LEDs Are Off

If these LEDs stay off, check to see if someone pressed the WIFI button on the front of the router. This button turns

the WiFi radios in the router on and off.These LEDs are lit when the WiFi radios are turned on.

Internet or Ethernet Port LEDs Are Off

If the Internet LED or the Ethernet port LEDs does not light when the Ethernet connection is made,

check the following:

• Make sure that the Ethernet cable connections are secure at the router and at the modem or computer.

• Make sure that power is turned on to the connected modem or computer.

• Be sure that you are using the correct cable.

When connecting the router’s Internet port to a cable or DSL modem, use the cable that was supplied with the cable

or DSL modem.This cable can be a standard straight-through Ethernet cable or an Ethernet crossover cable.

Cannot Log In to the Router

If you are unable to log in to the router from a computer on your local network, check the following:

• If you are using an Ethernet-connected computer, check the Ethernet connection between the computer and

the router.

• Make sure that the IP address of your computer is on the same subnet as the router. If you are using the

recommended addressing scheme, your computer’s address is in the range of 192.168.1.2 to 192.168.1.254.

• If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and Mac OS generate and

assign an IP address if the computer cannot reach a DHCP server. These autogenerated addresses are in the

range of 169.254.x.x. If your IP address is in this range, check the connection from the computer to the router,

and reboot your computer.

• If your router’s IP address was changed and you do not know the current IP address, clear the router’s

configuration to factory defaults.This sets the router’s IP address to 192.168.1.1. For more information, see

Factory Settings on page 182.

• Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer, click

the Refresh button to be sure that the Java applet is loaded.

• Try quitting the browser and launching it again.

• Make sure that you are using the correct login information. The user name is admin, and the default password

is password. Make sure that Caps Lock is off when you enter this information.

Cannot Access the Internet

If you can access your router but not the Internet, check to see if the router can obtain an IP address from your

Internet service provider (ISP). Unless your ISP provides a fixed IP address, your router requests an IP address

from the ISP.You can determine whether the request was successful using the ADVANCED Home screen.

Troubleshooting

175

Nighthawk X8 AC5300 Tri-Band WiFi Router

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear R8500 - Nighthawk X8 Seite 175

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear R8500 - Nighthawk X8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info