Bedienungsanleitung Netgear ReadyNAS 422 (Seite 212 von 213) (Englisch)

665138

212

Zoom out

Zoom in

Vorherige Seite

1/213

Nächste Seite

Electrical Safety Precautions

Follow basic electrical safety precautions to protect yourself from harm and the ReadyNAS from damage:

• Be aware of the locations of the power on/off switch on the chassis as well as the rooms emergency

power-off switch, disconnection switch, or electrical outlet. If an electrical accident occurs, you can then

quickly remove power from the system.

• Do not work alone when working with high-voltage components.

• Always disconnect power from the system when removing or installing main system components, such

as the main board or memory modules.When disconnecting power, first power down the system with

the operating system and then unplug the power cords of all the power supply storage systems in the

system.

• When working around exposed electrical circuits, ensure that another person who is familiar with the

power-off controls is nearby to switch off the power if necessary.

• Use only one hand when working with powered-on electrical equipment.This is to avoid making a

complete circuit, which will cause electrical shock. Use extreme caution when using metal tools, which

can easily damage any electrical components or circuit boards they come into contact with.

• Do not use mats designed to decrease static electrical discharge as protection from electrical shock.

Instead, use rubber mats that have been specifically designed as electrical insulators.

• Use only power supply cords that include a grounding plug and plug them into grounded electrical

outlets.

General Safety Precautions

Follow these rules to ensure general safety:

• Keep the area around the ReadyNAS clean and free of clutter.

• See the technical specifications in this manual for details about your specific ReadyNAS storage systems.

• Replace the on-board battery only with the same battery or an equivalent type of battery recommended

by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

Installing the battery upside down reverses its polarities and creates a danger of

explosion.

Note

• Only trained service technicians can replace the soldered-in self-resetting PTC (positive temperature

coefficient) fuses on the main board, using only new fuses that are the same as or equivalent to the

ones being replaced. Contact technical support for details and support.

Electrostatic Discharge Precautions

Electrostatic discharge (ESD) is generated by two objects with different electrical charges coming into contact

with each other. An electrical discharge is created to neutralize this difference, which can damage electronic

components and printed circuit boards.The following measures are generally sufficient to neutralize this

difference before contact is made to protect your equipment from ESD:

Defaults and Technical Specifications

212

ReadyNAS OS 6 Desktop Storage Systems

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear ReadyNAS 422 Seite 212

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info