Bedienungsanleitung Netgear SRC60 (Seite 2 von 2) (Englisch)

681101

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Orbi Pro Ceiling Satellite Overview

Power LED on the top panel

LED bar on the top panel

DC power connector

PoE+ LAN 1 port

LAN 2 port

Reset button

Sync button

3 4

Manually Sync Your Satellite Before You Install It

Place your Orbi Pro router and Orbi satellite near each other during the syncing process. After your router and satellite are synced, mount

the satellite.

1. Place your Orbi satellite in an area near your Orbi Pro router.

2. Connect your satellite to a power source.

Either connect the power adapter to the satellite and to a power source or connect PoE+ LAN port 1 on the satellite to an Ethernet

cable and to a Power over Ethernet Plus (PoE+) switch that can provide 802.3at (PoE+) power.

The Power LED on the top panel of the Orbi satellite lights solid green.

Note: If the Power LED does not light, check the power source or the PoE+ switch. If the Power LED lights red, the power is not at the

required 802.3at (PoE+) level. Make sure that you use an 802.3at (PoE+) switch and not an 802.af (PoE) switch. For more information

about the Power LED, see the user manual, which you can download by visiting https://www.netgear.com/support/download/.

3. Wait for the LED bar (next to the Power LED) to light solid white.

The following is the LED bar behavior during booting:

• Pulsing white. The satellite is booting.

• Solid white. The satellite nished booting and is ready to sync with your router.

4. Press the Sync button on the back of your satellite, and within two minutes, press the Sync button on the back of your Orbi Pro router.

5. Wait for the satellite to sync with the router.

The LED bar on the satellite lights pulsing white while it attempts to sync with your Orbi Pro router. It might take about six minutes for

your satellite to sync.

After the LED bar lights pulsing white, it lights one of the following colors for about three minutes and then turns off:

6. Mount your satellite and connect it to a power source.

You can mount your satellite on a ceiling or on a wall. For more information, see Mount the Satellite on a Drop Ceiling or Mount the

Satellite on a Wall on the other side of this quick start guide.

Either connect the power adapter to the satellite and to a power source or connect PoE+ LAN port 1 on the satellite to an Ethernet

cable and to a PoE+ switch that can provide 802.3at (PoE+) power.

7. Make sure that the LED bar lights blue to indicate a good connection to the Orbi router.

Note: After your satellite syncs with your router, the satellite’s Sync button is disabled for security reasons. If you press the Sync button

and the satellite’s LED bar pulses magenta, this LED behavior indicates that the Sync button is disabled. To enable the Sync button, log

in to the router and go to the Attached Devices page. For more information, see the user manual.

Blue

The Orbi Pro router and satellite successfully synced, and the connection between the router and satellite is good.

Amber

The Orbi Pro router and satellite successfully synced, and the connection between the router and satellite is fair. Consider moving

the satellite closer to the router.

Magenta

The Orbi Pro router and satellite did not sync. Move the satellite closer to the router and try again.

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support/ to register your product, get

help, access the latest downloads and user manuals, and join our

community. We recommend that you use only ofcial NETGEAR

support resources.

Si ce produit est vendu au Canada, vous pouvez accéder à ce

document en français canadien à

https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document

in Canadian French at

https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU

Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the

power supply.

NETGEAR INTL LTD

Building 3, University Technology

Centre

Curraheen Road, Cork, Ireland

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes

only.

December 2018

Sync your Orbi Satellite With the

NETGEAR Insight App

You can use the NETGEAR Insight app to sync your Orbi satellite

with your Orbi Pro router. For more information about the app,

visit https://www.netgear.com/insight/.

1. Download the NETGEAR Insight app from the Apple App

Store or Google Play Store.

2. Launch the NETGEAR Insight app on your mobile device and

follow the prompts.

Note: If you don’t own a mobile device, follow the instructions

in Manually Sync Your Satellite Before You Install It.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear SRC60 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear SRC60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info