Bedienungsanleitung Netgear WAC104 (Seite 32 von 79) (Englisch)

710464

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

(Continued)

DescriptionField

Security Options

This information applies to the 5 GHz WiFi network.

If you change the WiFi security, select one of the following WiFi security options for the access point’s WiFi network:

• None.This option is the default setting. An open WiFi network does not provide any security. Any WiFi device

can join the network. We recommend that you do not use an open WiFi network but configure WiFi security.

• WPA2-PSK [AES]. This option is the default setting. This type of security enables WiFi devices that support

WPA2 to join the access point’s 5 GHz WiFi network. If you did not change the passphrase, the default

passphrase displays.The default passphrase is sharedsecret.WPA2 provides a secure connection but some

older WiFi devices do not detect WPA2 and support only WPA. If your network includes such older devices,

select WPA-PSK [TKIP] + WPA2-PSK [AES] security.

If you change the passphrase, in the Passphrase field, enter a phrase of 8 to 63 characters.To join the

access point’s WiFi network, a user must enter this passphrase.

• WPA-PSK [TKIP] + WPA2-PSK [AES]. This type of security enables WiFi devices that support either WPA

or WPA2 to join the access point’s 5 GHz WiFi network. However, WPA-PSK [TKIP] is less secure than

WPA2-PSK [AES] and limits the speed of WiFi devices to 54 Mbps.

To use this type of security, in the Passphrase field, enter a phrase of 8 to 63 characters.To join the access

point’s WiFi network, a user must enter this passphrase.

• WPA/WPA2 Enterprise. This type of security requires that your WiFi network can access a RADIUS server.

For information about configuring WPA/WPA2 Enterprise, see Configure WPA and WPA2 Enterprise WiFi

Security on page 35.

6. Click the Apply button.

Your settings are saved.

If you connected over WiFi to the network and you changed the SSID, you are disconnected from the

network.

7. Make sure that you can reconnect over WiFi to the network with its new settings.

If you cannot connect over WiFi, check the following:

• If your WiFi-enabled computer or mobile device is already connected to another WiFi network in your

area, disconnect it from that WiFi network and connect it to the WiFi network that the access point

provides. Some WiFi devices automatically connect to the first open network without WiFi security

that they discover.

• If your WiFi-enabled computer or mobile device is trying to connect to your network with its old

settings (before you changed the settings), update the WiFi network selection in your WiFi-enabled

computer or mobile device to match the current settings for your network.

• Does your WiFi device display as an attached device? (See View Devices Currently on the Network

on page 48.) If it does, it is connected to the network.

• Are you using the correct network name (SSID) and password?

Manage the Basic WiFi Network Settings

802.11ac Wireless Access

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear WAC104 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info