531672
48
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
3-2
v1.0, March 2008
Ad Hoc Mode is Not Working Correctly
You must click the Initiate Ad Hoc button before you click Apply.
To start an Ad Hoc network:
1. On the Settings tab, fill in the Network Name (SSID) field.
The Smart Wizard keeps asking me to save
settings.
If you change the settings the Smart Wizard offers you the
chance to save the changes. To avoid this prompt, simply click
Apply before you close the Smart Wizard.
Two WG111v3 icons are in the system tray. You have an older software version installed on your system
and it needs to be removed. See “Removing the Software” on
page 1-11, or “Upgrading the Wireless Adapter Software” on
page 1-11.
I can connect to the access point, but not
the other computers on the network or to
the Internet.
This could be a physical layer problem or a network
configuration problem.
1. Check to make sure that the access point is physically
connected to the Ethernet network.
2. Make sure that the IP addresses and the Windows
networking parameters are all configured correctly. See
the link to
“Internet Networking and TCP/IP Addressing”
on page B-1.
3. Restart the cable or DSL modem, router, access point, and
computer.
Viewing the IP address. To view the wireless adapter IP address, click the WG111v3
icon to open the Smart Wizard. Then check the IP address in
the About tab.
No IP address is assigned to the Wireless
Adapter.
This may occur if you upgraded your wireless adapter
software and did not reboot your system.
Either restart your computer, or connect to a different access
point.
It does not usually help to shut down the Smart Wizard or
disable/enable the card.
Note: Be sure that all computers in your Ad Hoc network are configured with static IP
addresses in the same subnet.
Table 3-1. Troubleshooting Tips (continued)
Problem Action
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Netgear WG111v3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Netgear WG111v3

Netgear WG111v3 Installationsanweisung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info